4
3.
Remove the glass to stop dispensing.
NOTE:
Ice may continue to dispense for several seconds after
removing the glass from the lever. The dispenser may continue to
make noise for a few seconds after dispensing.
The Dispenser Light
When you use the dispenser, the light will automatically turn on.
J
If you want the light to be on continuously, press LIGHT.
J
Press LIGHT again to turn the dispenser light off.
The dispenser lights are LEDs that cannot be changed. If it appears
that your dispenser lights are not working, see “Troubleshooting” for
more information.
The Dispenser Lock
The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE:
The lock feature does not shut off power to the refrigerator,
to the ice maker, or to the dispenser light. It simply deactivates the
dispenser lever. To turn off the ice maker, see “Ice Maker and
Storage Bin.”
J
Press and hold LOCK for 3 seconds to lock the dispenser.
J
Press and hold LOCK a second time to unlock the dispenser.
The display screen indicates when the dispenser is locked.
Ice Maker and Storage Bin
J
Allow 24 hours to produce the first batch of ice. Discard the first
three batches of ice produced.
J
The quality of your ice will be only as good as the quality of the
water supplied to your ice maker. Avoid connecting the ice maker
to a softened water supply. Water softener chemicals (such as
salt) can damage parts of the ice maker and lead to poor quality
ice. If a softened water supply cannot be avoided, make sure the
water softener is operating properly and is well maintained.
J
Do not use anything sharp to break up the ice in the storage bin.
This can cause damage to the ice container and the dispenser
mechanism.
J
Do not store anything on top of or in the ice maker or storage bin.
Turning the Ice Maker On/Off
J
The On/Off switch, located on the left wall of the freezer door, can
only be accessed when the ice storage bin has been removed.
See the following section for bin removal instructions.
ON
OFF
J
To turn on the ice maker, flip the switch to the ON (up) position.
J
To manually turn off the ice maker, flip the switch to the OFF
(down) position.
NOTE:
Your ice maker has an automatic shut off to keep the storage
bin from overfilling during normal operation. As ice is made, the ice
cubes will fill the ice storage bin, and the ice cubes will raise the shut
off arm to the OFF (arm up) position. When the storage bin is at full
capacity, the ice maker will automatically stop ice production, but the
ice maker On/Off switch will remain in the ON (up) position.
The Dispenser Light
When you use the dispenser, the light will automatically turn on.
If you want the light to be on continuously, press LIGHT.
Press LIGHT again to turn the dispenser light off.
The dispenser lights are LEDs that cannot be changed. If it appears
that your dispenser lights are not working, see “Troubleshooting” for
more information.
The Dispenser Lock
The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE:
The lock feature does not shut off power to the refrigerator, to
the ice maker, or to the dispenser light. It simply deactivates the
controls and dispenser lever. To turn off the ice maker, see “Ice Maker
and Storage Bin.”
Press and hold LOCK for 3 seconds to lock the dispenser.
Press and hold LOCK a second time to unlock the dispenser.
The display screen indicates when the dispenser is locked.
Ice Maker and Storage Bin
Allow 24 hours to produce the first batch of ice. Discard the first
three batches of ice produced.
The quality of your ice will be only as good as the quality of the
water supplied to your ice maker. Avoid connecting the ice maker to
a softened water supply. Water softener chemicals (such as salt)
can damage parts of the ice maker and lead to poor quality ice. If a
softened water supply cannot be avoided, make sure the water
softener is operating properly and is well maintained.
Do not use anything sharp to break up the ice in the storage bin.
This can cause damage to the ice container and the dispenser
mechanism.
Do not store anything on top of or in the ice maker or storage bin.
Turning the Ice Maker On/Off
The On/Off switch, located on the left wall of the freezer door, can only
be accessed when the ice storage bin has been removed. See the
following section for bin removal instructions.
To turn on the ice maker, flip the switch to the ON (up) position.
To manually turn off the ice maker, flip the switch to the OFF
(down) position.
NOTE:
Your ice maker has an automatic shutoff to keep the storage
bin from overfilling druing normal operation. As ice is made, the ice
cubes will fill the ice storage bin, and the ice cubes will raise the shutoff
arm to the OFF (arm up) position. When the storage bin is at full
capacity, the ice maker will automatically stop ice production, but the
ice maker On/Off switch will remain in the ON (up) position.
oving and Replacing the Ice Storage Bin
.
Press down the release lever and tilt the bucket outward. Use both
hands to hold the base of the storage bin, then lift it up and out.
NOTE:
It is not necessary to turn the ice maker control to the
OFF (right) position when removing the storage bin. The sensor
cover (“flipper door”) on the left wall of the freezer stops the ice
maker from producing ice if the door is open or the storage bin is
removed.
ON
OFF
The Dispenser Light
When you use the dispenser, the light will automatically turn on.
If you want the light to be on continuously, press LIGHT.
Press LIGHT again to turn the dispenser light off.
The dispenser lights are LEDs that cannot be changed. If it appears
that your dispenser lights are not working, see “Problem Solver” for
more information.
The Dispenser Lock
The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE:
The lock feature does not shut off power to the refrigerator, to
the ice maker, or to the dispenser light. It simply deactivates the
controls and dispenser lever. To turn off the ice maker, see “Ice Maker
and Storage Bin.”
Press and hold LOCK for 3 seconds to lock the dispenser.
Press and hold LOCK a second time to unlock the dispenser.
The display screen indicates when the dispenser is locked.
Ice Maker and Storage Bin
Allow 24 hours to produce the first batch of ice. Discard the first
three batches of ice produced.
The quality of your ice will be only as good as the quality of the
water supplied to your ice maker. Avoid connecting the ice maker to
a softened water supply. Water softener chemicals (such as salt)
can damage parts of the ice maker and lead to poor quality ice. If a
softened water supply cannot be avoided, make sure the water
softener is operating properly and is well maintained.
Do not use anything sharp to break up the ice in the storage bin.
This can cause damage to the ice container and the dispenser
mechanism.
Do not store anything on top of or in the ice maker or storage bin.
Turning the Ice Maker On/Off
The On/Off switch, located on the left wall of the freezer door, can only
be accessed when the ice storage bin has been removed. See the
following section for bin removal instructions.
To turn on the ice maker, flip the switch to the ON (up) position.
To manually turn off the ice maker, flip the switch to the OFF
(down) position.
NOTE:
Your ice maker has an automatic shutoff to keep the storage
bin from overfilling druing normal operation. As ice is made, the ice
cubes will fill the ice storage bin, and the ice cubes will raise the shutoff
arm to the OFF (arm up) position. When the storage bin is at full
capacity, the ice maker will automatically stop ice production, but the
ice maker On/Off switch will remain in the ON (up) position.
Removing and Replacing the Ice Storage Bin
1.
Press down the release lever and tilt the bucket outward. Use both
hands to hold the base of the storage bin, then lift it up and out.
NOTE:
It is not necessary to turn the ice maker control to the
OFF (right) position when removing the storage bin. The sensor
cover (“flipper door”) on the left wall of the freezer stops the ice
maker from producing ice if the door is open or the storage bin is
removed.
The Dispenser Light
When you use the dispenser, the light will automatically turn on.
If you want the light to be on continuously, press LIGHT.
Press LIGHT again to turn the dispenser light off.
The dispenser lights are LEDs that cannot be changed. If it appears
that your dispenser lights are not working, see “Problem Solver” for
more information.
The Dispenser Lock
The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE:
The lock feature does not shut off power to the refrigerator, to
the ice maker, or to the dispenser light. It simply deactivates the
controls and dispenser lever. To turn off the ice maker, see “Ice Maker
and Storage Bin.”
Press and hold LOCK for 3 seconds to lock the dispenser.
Press and hold LOCK a second time to unlock the dispenser.
The display screen indicates when the dispenser is locked.
Ice Maker and Storage Bin
Allow 24 hours to produce the first batch of ice. Discard the first
three batches of ice produced.
The quality of your ice will be only as good as the quality of the
water supplied to your ice maker. Avoid connecting the ice maker to
a softened water supply. Water softener chemicals (such as salt)
can damage parts of the ice maker and lead to poor quality ice. If a
softened water supply cannot be avoided, make sure the water
softener is operating properly and is well maintained.
Do not use anything sharp to break up the ice in the storage bin.
This can cause damage to the ice container and the dispenser
mechanism.
Do not store anything on top of or in the ice maker or storage bin.
Turning the Ice Maker On/Off
The On/Off switch, located on the left wall of the freezer door, can only
be accessed when the ice storage bin has been removed. See the
following section for bin removal instructions.
To turn on the ice maker, flip the switch to the ON (up) position.
To manually turn off the ice maker, flip the switch to the OFF
(down) position.
NOTE:
Your ice maker has an automatic shut off to keep the storage
bin from overfilling druing normal operation. As ice is made, the ice
cubes will fill the ice storage bin, and the ice cubes will raise the shut
off arm to the OFF (arm up) position. When the storage bin is at full
capacity, the ice maker will automatically stop ice production, but the
ice maker On/Off switch will remain in the ON (up) position.
Removing and Replacing the Ice Storage Bin
1.
Press down the release lever and tilt the bucket outward. Use both
hands to hold the base of the storage bin, then lift it up and out.
NOTE:
It is not necessary to turn the ice maker control to the
OFF (right) position when removing the storage bin. The sensor
cover (“flipper door”) on the left wall of the freezer stops the ice
maker from producing ice if the door is open or the storage bin is
removed.
A
C
B
D
A
4
The Dispenser Light
When you use the dispenser, the light will automatically turn on.
If you want the light to be on continuously, press LIGHT.
Press LIGHT again to turn the dispenser light off.
The dispenser lights are LEDs that cannot be changed. If it appears
that your dispenser lights are not working, see “Problem Solver” for
more information.
The Dispenser Lock
The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE:
The lock feature does not shut off power to the refrigerator, to
the ice maker, or to the dispenser light. It simply deactivates the
controls and dispenser lever. To turn off the ice maker, see “Ice Maker
and Storage Bin.”
Press and hold LOCK for 3 seconds to lock the dispenser.
Press and hold LOCK a second time to unlock the dispenser.
The display screen indicates when the dispenser is locked.
Ice Maker and Storage Bin
Allow 24 hours to produce the first batch of ice. Discard the first
three batches of ice produced.
The quality of your ice will be only as good as the quality of the
water supplied to your ice maker. Avoid connecting the ice maker to
a softened water supply. Water softener chemicals (such as salt)
can damage parts of the ice maker and lead to poor quality ice. If a
softened water supply cannot be avoided, make sure the water
softener is operating properly and is well maintained.
Do not use anything sharp to break up the ice in the storage bin.
This can cause damage to the ice container and the dispenser
mechanism.
Do not store anything on top of or in the ice maker or storage bin.
Turning the Ice Maker On/Off
The On/Off switch, located on the left wall of the freezer door, can only
be accessed when the ice storage bin has been removed. See the
following section for bin removal instructions.
To turn on the ice maker, flip the switch to the ON (up) position.
To manually turn off the ice maker, flip the switch to the OFF
(down) position.
NOTE:
Your ice maker has an automatic shutoff to keep the storage
bin from overfilling druing normal operation. As ice is made, the ice
cubes will fill the ice storage bin, and the ice cubes will raise the shutoff
arm to the OFF (arm up) position. When the storage bin is at full
capacity, the ice maker will automatically stop ice production, but the
ice maker On/Off switch will remain in the ON (up) position.
Removing and Replacing the Ice Storage Bin
1.
Press down the release lever and tilt the bucket outward. Use both
hands to hold the base of the storage bin, then lift it up and out.
NOTE:
It is not necessary to turn the ice maker control to the
OFF (right) position when removing the storage bin. The sensor
cover (“flipper door”) on the left wall of the freezer stops the ice
maker from producing ice if the door is open or the storage bin is
removed.
A. Water dispenser lever
Ice production off
(shut off arm UP)
Ice production on
(shut off arm DOWN)
A. Release lever
Removing and Replacing the Ice Storage Bin
1.
Press down the release lever
and tilt the bucket outward. Use
both hands to hold the base of the storage bin, then lift it up and
out.
A
A. Release lever
NOTE:
It is not necessary to turn the ice maker control to the OFF
(right) position when removing the storage bin. The sensor cover
(“flipper door”) on the left wall of the freezer stops the ice maker from
producing ice if the door is open or the storage bin is removed.
A
B
A. On/off switch
B. Storage bin sensor
2.
Replace the bin by sliding it onto the door, then tilting it back into
an upright position. The release lever will click when the bin is
securely in place.
