19
Data Displays
The water softener has a DATA button to get information about your water softener.
•
CAPACITY (remaining) -- This is the percentage of water softening capacity remaining.
Immediately after a regeneration, 100% shows. Then, as water is used, the percentage
decreases until the next regeneration. During regenerations, the percentage increments
upward.
NOTE:
Zero (0%) shows until after the first regeneration begins, after connecting to
electrical power.
WATER MANAGEMENT SYSTEM
%
CAPACITY
•
FLOW RATE, GPM* -- When using soft water, this display shows the gallon per minute
flow rate passing through the softener. Zero shows if water is not in use.
FLOW RATE
WATER MANAGEMENT SYSTEM
GPM
•
GALLONS* TODAY -- Each day, beginning at midnight, the timer keeps a running count
of the total gallons of water passing through the softener.
GALLONS TODAY
WATER MANAGEMENT SYSTEM
•
AVERAGE DAILY GALLONS* -- The figure displayed is the average gallons of water
used by the household each day, over the past seven day period.
PM
RECHARGE TONIGHT
AVG DAILY GALLONS
x 10
WATER MANAGEMENT SYSTEM
* If preferred, you can set the timer to show the reading in liters instead of gallons. If gallons today,
or average daily gallons exceeds 1999, a (x 10) indicator appears. This means you must multiply the
number shown times 10.
