16
■
In an Automatic Cycle, if a wet item is not detected after
approximately 5 minutes, the dryer goes directly into Cool
Down and the Cool Down and the WRINKLE SHIELD™
setting indicators illuminate, if selected.
■
In a Timed Cycle, wet items are not detected. The dryer will
continue to run for the length of time selected, and the Wet
light will illuminate. The damp light will not illuminate.
Damp
The Damp light illuminates in an Automatic Cycle when the
laundry is approximately 80% dry. Damp Dry Signal beeps, if
selected. See “Options.”
Cool Down
The Cool Down light illuminates during the cool down part of the
cycle. Laundry cools for ease in handling.
Done
The Done light illuminates when the drying cycle is finished. This
indicator stays on during the WRINKLE SHIELD™ setting.
WRINKLE SHIELD™ Setting
The the WRINKLE SHIELD™ setting light illuminates when this
option is selected. This indicator stays on during the WRINKLE
SHIELD™ setting.
Indicator lights
Other indicator lights show Cycle, Modifiers, Options and Cycle
Signal settings selected. The display shows the estimated or
actual time remaining.
Cycles
Select the drying cycle that matches the type of load you are
drying. See Automatic or Timed Preset Cycle Settings charts.
AUTOMATIC CYCLES
Automatic Cycles allow you to match the cycle to the load you
are drying. See the following Automatic Preset Cycle Settings
chart. Each cycle dries certain fabrics at the recommended
temperature. A sensor detects the moisture in the load and
automatically adjusts the drying time for optimal drying.
Heavy Duty
Use this cycle to get high heat for heavyweight mixed loads,
cottons and jeans.
Normal
Use this cycle to get medium heat for drying sturdy fabrics such
as work clothes.
Casual
Use this cycle to get low heat for drying no-iron fabrics, such as
sport shirts, casual business clothes and permanent press
blends.
Delicate
Use this cycle to get extra-low heat to gently dry items such as
lingerie, blouses or washable knit fabrics.
TIMED CYCLES
Use Timed Cycles to select a specific amount of drying time and
a drying temperature. When a Timed Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing the Time Adjust up or down arrows. See
“Changing Cycles, Modifiers and Options.”
NOTE:
Timed Cycles may also be used with the dryer rack. See
“Dryer Rack.”
Timed Dry
Use this cycle to complete drying if items are still damp after an
Automatic Cycle. Timed dry is also useful for drying heavyweight
and bulky items, such as bedspreads and work clothes.
Lightweight garments, such as exercise wear, can be dried using
Timed Dry on a low temperature setting.
QUICK DRY
Use this cycle for drying small loads or loads that need a short
drying time.
Touch Up
Use this cycle to help smooth out wrinkles from such items as
clothes packed in a suitcase or items wrinkled from being left in
the dryer too long.
Automatic Preset Cycle Settings
Automatic Cycles
Load Type
Temperature
HEAVY DUTY
Heavyweight mixed loads, cottons,
jeans
High
NORMAL
Corduroys, work clothes
Medium
CASUAL
Business casual clothes, permanent
press, synthetics
Low
DELICATE
Lingerie, blouses, washable knit
fabrics
Extra-Low
Timed Preset Cycle Settings
Timed Cycles
Load Type
Default
Temperature
Default Time
(Minutes)
TIMED DRY
Heavyweight, bulky items,
work clothes
High
40
QUICK DRY
Small loads
Medium
24
TOUCH UP
Helps to smooth out
wrinkles
Medium
20
Summary of Contents for WGD6400SW - 29" Gas Dryer
Page 24: ...24 Notes ...
Page 48: ...48 Notas ...
