background image

30

 

Troubleshooting

If you experience

Possible Causes

Solution

Washer not performing as expected (cont.)

Not cleaning or  

removing stains  

(cont.)

Not using correct cycle for fabric type.

Use a higher soil level setting and warmer wash temperature 

to improve cleaning.
If using Quick Wash cycle, wash only a few items.
Use Whites and Heavy Duty cycles for tough cleaning.
Add an extra rinse for heavily soiled loads.

Not using dispensers. 

Use dispensers to avoid chlorine bleach and fabric  

softener staining.
Load dispensers before starting a cycle.
Avoid overfilling.
Do not add products other than those specified directly to load.

Dispense cartridge is empty.

Fill dispense cartridge to the “MAX” line with HE liquid detergent.

Not washing like colors together.

Wash like colors together and remove promptly after the cycle  

is complete to avoid dye transfer.

Not enough detergent used,  

or hard water.

Use more detergent for washing heavy soils in cold or  

hard water.
Touch WATER HARDNESS to change water hardness to “hard.”

Odors

Monthly maintenance not done as  

recommended.

Run the Clean Washer with affresh

®

 cycle monthly or every  

30 wash cycles. See “Washer Care” in “Washer Maintenance.”
Unload washer as soon as cycle is complete. Use the  

FanFresh

®

 option if load cannot be removed immediately  

after the wash is complete.

Not using HE detergent or using too 

much HE detergent.

Use only HE detergent. Be sure to measure correctly. Always  

follow the manufacturer’s directions.
See “Washer Care” section.

Door not left open after use.

This washer has a tight seal to avoid water leaks. To avoid odors, 

leave the door open to allow the washer to dry between uses.

Fabric damage

Sharp items were in pockets during 

wash cycle.

Empty pockets, zip zippers, and snap or hook fasteners before 

washing to avoid snags and tears.

Strings and straps could have tangled.

Tie all strings and straps before starting wash load.

Items may have been damaged  

before washing.

Mend rips and broken threads in seams before washing.

Fabric damage can occur if washer  

is tightly packed.

Avoid tightly packing the washer. Load with dry items only.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 garments after washer has started.

Fabric damage can occur if washer 

door is closed on an item, trapping  

it between the door glass and the  

rubber seal.

Do not overfill the washer.

Push wash load fully into the washer.

First try the solutions suggested here or visit our website at www.whirlpool.com/product_help –  

In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.

Summary of Contents for WFW75HEFW0


































Reviews: