3
3
ELECTRICAL SUPPLY REQUIREMENTS
•
If your range has electrical accessories, place it near a wall outlet.
•
The range must be connected to an electrically grounded outlet in accordance with local
regulations.
•
DO NOT USE ELECTRICAL EXTENSIONS OR MULTIPLE CONTACTS.
•
This gas range is equipped with a three-prong plug with ground contact for protection
against the risk of electric shock.
•
DO NOT CUT OR REMOVE THE TIP FOR GROUND FROM THE PLUG.
•
The power cord must be connected to an outlet with a voltage of 105 - 140 V ~ ± 10%.
Make sure the installation is properly grounded.
•
Once the connection to the gas line has been completed, connect the range to the electric
power.
•
Disconnect the power supply before servicing.
WARNING
WARNING
Explosion Hazard
Always use pipe and pressure regulators according to the local standards.
Check the validity of the pressure in pipes and regulators and replace
them if it is necessary.
Properly tighten all gas connections during the installation.
Install the appliance according to the specifications described in the
instruction’s manual.
Failure to follow these instructions can cause explosion, fire or possible
damage to the integrity of people.
Electric Shock Hazard
Do not use cable extension.
Do not use the product without a grounded connection.
Do not use adapters or triples.
Disconnect the power supply before servicing.
Reinstall all components and panels before operating the appliance.
Do not remove the connection terminal to ground in your installation.
Failure to follow these instructions can result in death, fire, or
electrical shock.
30-Mar-2020 13:12:28 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
