background image

Before moving range across floor, check
that range is still on cardboard shipping
base to protect floor covering.

5.

Move range close to cabinet

opening. 

6.

Remove cardboard from under

range. Carefully move range into final
position.

Operating position

8.

If installing the range in a mobile

home, you must secure the range to the
floor. Any method of securing the range
is adequate as long as it conforms to the
standards in the “Mobile home
installation” instruction section.

9.

Place rack in oven. Place level on

rack, first side to side; then front to back. 

If range is not level, pull range forward
until rear leveling leg is removed from
the anti-tip bracket. Use 3/8" drive ratchet
and channel lock pliers to adjust leveling
legs up or down until range is level. Push
range back into position. Check that rear
leveling leg is engaged in anti-tip bracket.

NOTE:

Oven must be level for satisfactory

baking conditions.

10.

Replace the storage drawer or

lower panel.

7.

Making sure the anti-tip bracket is

installed:

• Look for the anti-tip bracket securely

attached to floor.

• Slide range back so rear range foot is

under anti-tip bracket. 

4

Now start...

Excessive Weight Hazard

Use two or more people to move and
install range.

Failure to do so can result in back or
other injury.

WARNING

1.

Put on safety glasses and gloves.

Remove shipping materials, tape and
protective film from range. Keep
cardboard bottom and shipping base
under range. Remove oven racks and
parts package from inside oven.

2.

Do not remove the cardboard

shipping base at this time.

3.

Remove storage drawer. Use a 3/8"

drive ratchet to lower rear leveling legs
one-half turn. Use channel lock pliers to
lower front leveling legs one-half turn. 

Contact a qualified floor covering installer
for the best procedure for drilling
mounting holes through your type floor
covering.

4.

Use the anti-tip bracket template to

install the anti-tip bracket. 

Anti-tip bracket must be anchored
securely to the sub-floor.

Depending on the thickness of your
flooring, longer screws may be necessary
to anchor the bracket to the sub-floor.
Longer screws are available from your
local hardware store.

Check that range is on cardboard
shipping base to protect floor covering.

Tip Over Hazard

A child or adult can tip the range
and be killed.

Connect anti-tip bracket to rear
range foot.

Reconnect the anti-tip bracket, if
the range is moved.

Failure to follow these instructions
can result in death or serious
burns to children and adults.

WARNING

cardboard
shipping base

rear leveling leg

front
leveling leg

anti-tip
bracket

range foot

Summary of Contents for werp4120pq0













Reviews: