3
KEYPAD
FEATURE
INSTRUCTIONS
RAPID PREHEAT
Rapid oven
preheating
Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to OFF,
but it can be changed to ON.
1.
Press RAPID PREHEAT.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL to exit and display the time of day.
NOTE:
This feature should only be used for one-rack baking. Unused racks should be
removed prior to Rapid Preheat. A standard rack should be used for Rapid Preheat.
If preheating for the Bake cycle has already started, Rapid Preheat may be started directly
by pressing RAPID PREHEAT.
AQUALIFT
SELF CLEAN
Clean cycle
See the “Clean Cycle” section in the Owner’s Manual.
START (Hold 3 Sec to
lock)
Oven control
lockout
1.
Check that the oven is OFF.
2.
Press and hold START (Hold 3 Sec to lock) for 3 seconds.
3.
A tone will sound, and “Control Locked” will scroll, and then “Locked” will be displayed.
4.
Repeat to unlock. No keypads will function with the controls locked. The cooktop
functions are not affected by the oven control lockout.
SETTINGS/CLOCK
Energy save
1.
Press SETTINGS/CLOCK until “ENERGY SAVER” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press CANCEL to exit and display the time of day
If Energy Save is ON, the range will go into Sleep mode after 5 minutes of inactivity.
Any keypad press will activate the display. If Energy Save is OFF, the display will be
on at all times.
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss.
Press CANCEL or CANCEL UPPER to clear. When the oven is
not in use, the time of day is displayed. If the range is in Energy
Save mode, the display will be blank when not in use.
Tones
Tones are audible signals, indicating the following:
One Tone
�
Valid keypad press
�
Oven is preheated (long tone)
�
Function has been entered.
�
Reminder, repeating each minute after the end-of-cycle tones
Three Tones
�
Invalid keypad press
Four Tones
�
End of cycle
Use the Settings/Clock or Clock/Tools keypad to change the
tone settings. Depending on your model.
Energy Save
The Energy Save mode puts the range into Sleep mode and
reduces energy consumption.
To Activate the Energy Save Mode:
1.
Press and hold SETTINGS/CLOCK for 3 seconds. “Energy
saver on.” will appear in the display.
2.
The setting will be activated after 5 minutes.
To Deactivate the Energy Save Mode:
1.
Press and hold SETTINGS/CLOCK for 3 seconds. “Energy
saver off.” will appear in the display.
2.
The clock will reappear in the display and the range can be
operated as usual.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Settings/
Clock or Clock/Tools keypad.
Use the Settings/Clock or Clock/Tools keypad to scroll through the
features that can be changed. Each press of the Settings/Clock or
Clock/Tools keypad will advance the display to the next setting.
After selecting the feature to be changed, the control will prompt
you for the required input. Then press START or CANCEL/
CANCEL UPPER to exit and display the time of day. Details of all
of the feature changes are explained in the following sections.
Press CANCEL/CANCEL UPPER to exit Settings.
Clock
The Clock can use a 12- or 24-hour cycle.
1.
Press SETTINGS/CLOCK until “CLOCK” is displayed.
2.
Press START to change the time.
3.
Press 3 for AM or 6 for PM.
4.
Use the number keypad to set the time of day.
5.
Press START or CANCEL to exit and display the time of day.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed to
Celsius.
1.
Press SETTINGS/CLOCK or CLOCK/TOOLS until “TEMP
UNIT” is displayed.
2.
The current setting will be displayed.
3.
Press the “1” keypad to adjust the setting.
4.
Press START or CANCEL/CANCEL UPPER to exit and
display the time of day.
