5
EN
FIRST TIME USE
1. SELECT THE LANGUAGE
You will need to set the language and the time when
you switch on the appliance for the first time: “English”
will show on the display.
English
Turn the
adjustment knob
to scroll through the list of
available languages and select the one you require.
Press
to confirm your selection.
Please note: The language can subsequently be changed by
selecting “LANGUAGE” in “SETTINGS” menu.
2. SET THE TIME
After selecting the language, you will need to set the
current time: The two digits for the hour will flash on
the display.
CLOCK
Turn the
adjustment knob
to set the current hour and
press
: The two digits for the minutes will flash on the
display. Turn the
adjustment knob
to set the minutes
and press
to confirm.
Please note: You may need to set the time again following
lengthy power outages. Select “CLOCK” in “SETTINGS” menu.
3. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal. Before starting to cook food, we therefore
recommend heating the oven with it empty in order to
remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.
Heat the oven to 200 °C for around one hour,
ideally using the “Fast preheat” function. Follow the
instructions for setting the function correctly.
Please note: It is advisable to air the room after using the
appliance for the first time.
SPECIALS
• FAST PREHEAT
For quickly preheating the oven before a cooking
cycle. Wait for the function to finish before placing
food inside the oven.
Once preheating has finished, the oven will select
the “Forced Air” function automatically.
• KEEP WARM
For keeping just-cooked food hot and crisp,
including meat, fried foods or cakes.
• RISING
For optimal proving of sweet or savoury dough. To
maintain the quality of proving, do not activate the
function if the oven is still hot following a cooking
cycle.
• SMART CLEAN
The action of the steam released during this special
cleaning cycle allows dirt and food residues to be
removed with ease. Pour a cup of drinking water
into the supplied steamer bottom (3) only or on
a microwave proof container and activate the
function.
SETTINGS
For adjusting the oven settings.
When “ECO” mode is active the brightness of the display will
be reduced to save energy and lamp switches off after 1
minute. It will be reactivated automatically whenever any of
the buttons are pressed.
When “DEMO” is “On” all commands are active and menus
available but the oven doesn’t heat up. To deactivate this
mode, access “DEMO” from “SETTINGS” menu and select “Off”.
By selecting “FACTORY RESET”, the product switches off and
then it returns to first switch on. All settings will be deleted.
FAVORITES
For retrieving the list of 10 favorite functions.
