10
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed
to Celsius.
To change:
1.
Press SETTINGS until “TEMP UNIT” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones. Reminder tones are still active when all tones are disabled.
1.
Press SETTINGS until “ALL SOUNDS” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1.
Press SETTINGS until “CYCLE TONE END” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute
after the end of cycle tones.
1.
Press SETTINGS until “REMINDER TONE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1.
Press SETTINGS until “KEY PRESS TONE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Tone Pitch
Sets the pitch of the tone to either high or low.
1.
Press SETTINGS until “TONE PITCH” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Demo Mode
IMPORTANT:
This feature is intended for use on the sales floor
with 120 V power connection and permits the control features
to be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
1.
Press SETTINGS until “DEMO MODE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12
hours after the oven initiates a cook or clean function. This will
not interfere with any timed or delay cook functions.
1.
Press SETTINGS until “12-HR SHUT-OFF” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
12/24 Hour Clock
1.
Press SETTINGS until “12/24 HR” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Languages - Scrolling Display Text
Language options are English, Spanish and French.
1.
Press SETTINGS until “LANGUAGE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not show messages or temperature
changes.
When the oven door is opened or closed, the oven light will not
turn on or off and the heating elements will not turn on or off
immediately.
To Enable Sabbath Mode Capability (one time only):
1.
Open oven door.
2.
Press 7-8-9-6.
“SABBATH ON” or “SABBATH OFF” and “PRESS START TO
ENTER” will appear in the display.
3.
Press START to change the displayed status.
4.
Close oven door. Sabbath Mode can be used for baking.
NOTE:
To disable the Sabbath Mode, repeat steps 1 - 3 to
change the status from “SABBATH ON” to “SABBATH OFF.”
