9. Troubleshooting
WARNING: To reduce the risk of personal injury, unplug the vacuum cleaner
before performing maintenance or troubleshooting checks.
PROBLEM:
Vacuum cleaner won't run
Cause:
Not properly plugged into electrical outlet.
Solution:
Plug in securely.
Cause:
No electricity in the electrical outlet.
Solution:
Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution:
Push on/off switch to ‘on’.
Cause:
Blocked central filter.
Solution:
Remove, clean and replace filters. See page 6.
Cause:
Blown fuse/tripped breaker.
Solution:
Reset circuit breaker or replace fuse.
PROBLEM: Cleaner
won’t
pick up/loss of suction.
Cause:
Dirt container not installed properly.
Solution:
Review dirt container replacement.
Cause:
Dirt container full or blocked.
Solution:
Empty dirt container.
Cause: Clogged
filters.
Solution:
Remove, clean and replace filters.
PROBLEM:
Accessories won’t pick up.
Cause:
Accessories are not attached correctly.
Solution:
Refer to section 5.
PROBLEM:
Dust escaping from the vacuum cleaner
Cause:
Dirt container full.
Solution:
Empty dirt container.
Cause:
Dirt container not installed correctly.
Solution:
Review dirt container replacement.
Cause:
Hose is not installed correctly.
Solution: Review
installation.
Cause:
Filter not installed completely.
Solution:
Remove, clean and replace filters.
10. Technical Specification
Model:
VB-100
Voltage:
220V ~50Hz
Power:
1400W
Capacity:
1.6
Litres
approx
Cord
length:
5M
approx
*
Subject to technical change without notice.
11. Service & Help
Please contact Whirlpool Service Centre:
Address
: 14/F Wilson Logistics Centre, 24-28 Kung Yip Street, Kwai Chung, Hong Kong
Star Hotline
: 852-2406 9138
