- 9 -
Remote controller
Insert the batteries into RC
1. Insert a pin and gently press down on the battery
cover and push in the direction of the arrow to
remove, as shown.
2. Insert 2 AAA batteries (1.5V) into the compartment.
Ensure that “+” and “-” polarity is correctly positioned.
3. Close the battery cover on the remote control.
•
Remote Control presetting
Each time the batteries are replaced in the remote
controller, the remote controller pre-set at Heat Pump
mode. The heat pump AC remote controller can be used
to control the cool only AC models.
Use RC to control the appliance
• To operate the appliance by remote control, point the
remote control at the receiving device on the indoor
unit, to ensure receiving sensibility.
• To send a message from remote control, the symbol
will flash for 1 second. On receipt of the message,
the appliance will emit a beep.
•
Signal receptor
The remote control will operate the air conditioner at a
distance of up to 7m.
• Each time the batteries are replaced in the remote
control, the remote control is pre-set at Heat Pump
mode.
Note: please follow the intruction which matches to the remote controller you receive for Air Conditioner operation.
Function description of buttons (P1-04)
1. ON/OFF BUTTON
Starts or Stops the appliance by
pressing this button.
3. FAN BUTTON
Used to select fan speed in sequence
auto, high, medium or low.
4-5. TEMPERATURE BUTTON
Used to select the room
temperature.
Used to set the time in timer mode.
6. 6
th
SENSE BUTTON
Sets or cancels 6
th
sense operation.
7. SWING BUTTON
Stops or starts horizontal adjustment
louver swinging and sets the desired
up/down airflow direction.
10-11. HUMIDITY BUTTON
Used to set desired humidity level,
they areonly available under 6
th
SENSE mode.
16. SUPER SILENT BUTTON
Used to start or stop the super
silent operation to have a low noise
environment.
2. MODE BUTTON
Used to select the operation mode
in sequence Cooling, hearing or
fan.
8. SLEEP BUTTON
Used to select the sleep mode in
sequence of sleep 1, sleep 2, sleep
3 sleep 4 and sleep off.
9. AROUND U BUTTON
Used to set or cancel Around U
function.
12. JET BUTTON
Used to start or stop the fast
cooling or heating.
13. DIM BUTTON
Used to turn on or turn off display
light on indoor unit.
14. POWER SAVE BUTTON
Used to start or stop the power
save operation.
15. TIMER BUTTON
Used to set the time for turn on or
turn off the appliance.
Symbols on RC display
Active RC by pressing UNLOCK button
Cooling indicator
Auto fan speed
Sleep indicator 1
Press the button, the backlight
will be lighted up and function
buttons will be activated for
use. Press again to lock remote
controller. If no operation on
remote controller for 10s, the
remote controller will be locked
automatically.
PRESS
Humidity plus indicator
High fan speed
Sleep indicator 2
Humidity minus indicator
Medium fan speed
Sleep indicator 3
Fan only indicator
Low fan speed
Sleep indicator 4
Heating indicator
Super silent indicator
Display set temperature
Around U indicator
6
th
SENSE indicator
ON
OFF
Display set timer
Jet indicator
Power save indicator
Signal transmission
Summary of Contents for SPIS409L
Page 2: ......
