19
5.
After cleaning the gas tube opening and ports,
replace the burner
cap. To replace the
burner cap, make
sure the alignment
pins on the cap are
properly aligned with
the burner base.
S
EALED SURFACE BURNERS AND COOKTOP
(
CONT
.
)
To clean the burners:
1.
Pull the burner cap straight up from the
burner base.
2.
Clean the burner cap with warm, soapy water
and a sponge. You can also clean it with a
non-abrasive scrubbing pad or mild abrasive
powdered cleanser. Do not clean the burner cap
in a dishwasher.
3.
If the gas tube opening has become soiled or
clogged, use a damp cloth to clean the area.
4.
If the ports are clogged, clean them with a
straight pin. Do not
enlarge or distort the
port. Do not use a
wooden toothpick.
If the burner needs to
be adjusted, call a
qualified technician
for service.
6.
Turn on the burner to see if it will light. If the
burner does not light after you have cleaned it,
recheck cap alignment or contact a designated
service technician. Do not service the sealed
burner yourself.
CARING FOR YOUR RANGE
Gas tube opening
Summary of Contents for SF310BEG
Page 26: ...26 NOTES ...
