background image

A - Start/Pause button

After selecting your desired drying program, press this button to start the dryer. To

      pause the dryer while in operation, press this button again. 

      

11

B - Program control knob

Turn this knob to choose the drying program you desire. This dryer has 15 program 
options available for you to choose.

C - Delay button

You may choose to start the dryer after a preset time. The delay range is between 

1 and 12 hours. Gently touch the delay button before a program starts, each touch 

will add one hour. When in excess of 12 hours, the remaining time will be re-displayed. 

After a delay time is set, touch the Start/Pause button to start the delay operation 

and the indicator light will flash.

CONTROL PANEL

D

B

C

A E

E

D

 - 

LED screen

This screen displays the remaining time for a program and the delay time. 

E

 - 

Indicator light

OPERATING INSTRUCTIONS

1. Power up

Insert the power plug into an appropriate power outlet that is properly installed and 

    grounded. Operating power supply: 220-240V~50Hz.

2. Laundry loading

Open the door and load the laundry into the drum of the dryer. For a more energy

    efficient and better drying result, make sure the load has been spun dry. Try to 

   loosen the load when placing in the dryer.

Note:

Check labels on clothing before placing them in the dryer. Some articles are not 

            suitable for machine dry. High temperature may damage the fabric.

May be tumble dried
Do not tumble dry 

Normal drying (high temperature)
Air dry or delicate drying (low temperature)

Summary of Contents for SDRY60





















Reviews: