51
PROBLEM
Cooking results are
not what you expected
The display is showing
“PF”
“F” followed by a
number shows on the
display
CAUSE
•
The range is not level. (See Installation Instructions.)
•
The oven temperature seems too low or too high. See
the “Adjusting the oven temperature control” section on
page 20 to adjust the oven temperature.
•
You did not preheat the oven before baking (if called for
in recipe).
•
You are using a pan that is not the correct type or size.
Refer to a reliable cookbook or recipe for recommended
pan type and size.
•
There is not enough air space around pan when baking.
Allow 1
1
⁄
2
to 2 inches of air space on all sides of pan.
•
The cookware is too large or too small for the coil element
being used. The pan should be the same size or slightly
larger than the coil element being used.
•
There has been a power failure. Reset the clock. (See
“Setting the clock” on page 15.)
•
Press the Off/Cancel pad. If the code reappears, note the
code and call for service. (See Step 2 in the “Requesting
Assistance or Service” section on page 52.)
If none of these items was causing your problem, see the “Requesting Assistance or
Service” section on page 52.
T R O U B L E S H O O T I N G
Summary of Contents for RS675PXE
Page 53: ...53 NOTES ...