Whirlpool PROD 06SCII, Installation And Maintenance Manual

Page: 36 / 40

36
Maximum programme duration . After the
machine has run for the maximum time (3
hours) it automatically stops. Check and repla-
ce any blown fuses in the fuse box. To cancel
the error message, switch off the machine or
open the door. If this does not work, call servi-
ce.
Sensor fault . Faulty moisture sensor. This error
message may also appear if you run the machine
with dry clothes or no clothes at all. Open the
door and the error message should disappear. If
not, call service.
If there is some other fault, call service and say
which error message appears in the display.
THE DISPLAY IS LIGHTING WHEN A PROGRAMME
IS SELECTED, BUT NO CHARACTERS OR DIGITS
ARE SHOWN
No characters or digits are shown on the dis-
play when a locked programme is selected.
To unlock a programme, see Changing set-
tings.
WRONG LANGUAGE DISPLAYED
If the display language has changed for some
reason you can go back to the original langua-
ge.
The languages you can choose between are
Dansk, Deutsch, English, Espanol, Français,
Italiano, Nederlands, Norsk, Portugués, Suomi
and Svenska.
TUMBLE DRYER TROUBLESHOOTING
To change language do as follows:
Switch off the power switch, , then switch
it on again so that the machine is in start-up
mode.
Press the
P8
button five times, then press
the
P1
button five times. You have to comple-
te these ten button presses within fifteen se-
conds.
Within three seconds of pressing the
P1
button for the fifth time you should then select
the language you want by pressing the
P6
or
P7
buttons.