-
16
-
Installation instruction
Tools and Parts
Gather the required tools and parts before starting
installation. Read and follow the instructions provided
with any tools listed here.
1. Tools needed
• Phillips screwdriver
• Saw
• Cordless drill and 1/8” bit
• Scissors
• Pencil
2. Parts Supplied
The company provides only one plan to install local air
conditioner. See “Install local Air Conditioner”.
Location Requirements
NOTES:
• The flexible exhaust hose allows placement of the air
conditioner between 23 1/2” and 67” (60 cm and 170 cm) from
window or door.
The appliance with supplementary heater needs to keep a
minimum distance of 100 cm from the combustible surfaces.
The appliance shall be installed,operated and stored in a room
which floor area larger than 1
4.5
m² and higher than 2.2 m.
Local air conditioners are designed as supplemental cooling
to local areas within a room.
• To ensure proper ventilation, keep the required distance from
the return air outlet to the wall or other obstacles at least
23 1/2” (60 cm).
• Do not block air outlet.
• Provide easy access to grounded outlet.
Electrical Requirements
•
The local air conditioner should be connected to a
220-240V / 50Hz, 20-amp fused grounded outlet.
•
The use of a time-delay fuse or time-delay circuit breaker is
recommended.
•
All wiring must comply with local and national electrical
regulations and be installed by a qualified electrician.
If you have any questions, contact a qualified electrician.
Use your power supply cord:
Plug power supply cord into a grounded outlet.
NOTES:
•
A damaged power supply cord must be replaced with a new
power supply cord obtained from the product manufacturer
and must not be repaired.
• Working temperature of Cooling 21°C- 35°C
Working temperature of Heating 7°C-27°C
For detail installation information, please download from: docs.whirlpool.eu
A.
Flexible exhaust hose
B.
Window exhaust adapter
C.
Outer slider section
D.
Rain Cover
E.
Inner slider section
Vertical
Silde Window
Horizontal
Silde Window
combustible surfaces
100 cm
60 cm - 170 cm
combustible surfaces
100 cm
60 cm - 170 cm