11
GETTING TO KNOW YOUR MICROWAVE OVEN
U
SING THE COOKTOP
/
COUNTER
-
TOP LIGHT
The pad on the bottom left of the control panel
controls the cooktop/countertop light.
Turn on/off light.
Press LIGHT once for HIGH, twice for LOW (night),
three times to turn off.
To set light to be on for a specific time:
1. Touch LIGHT.
(once or twice)
2. Touch TIMER SET.
Once, display will show “TIMER”.
Twice, display will show “FAN”, then “HR : MN”.
NOTES:
•
Be sure you have set a time of day with the
Clock function before setting any Timer function.
•
If both the fan and light are operating and TIMER
is touched twice, both the fan and light will be
controlled by the timer. The display will alternate
between “FAN” and “LIGHT” one time before
“HR:MN” is displayed.
3. Set light on time.
Example to turn light on for 1 hour and 30 minutes:
Touch “1 3 0” and display will show “1 : 30”.
4. Start Timed Light function.
Touch “START/ENTER” or “TIMER SET” and
display will show “L 1 : 30”.
NOTE: The letter “L” indicates the Timed Light
feature has been selected. If both the Timed Light
and Fan feature have been selected, an “H” (Hood)
will be displayed.
At end of time, the current time of day will show
and no tones will sound.
To cancel the Timed Light function:
NOTE: Touching TIMER OFF shuts off both the light
and timed function. Touching LIGHT shuts off just the
light.
To set fan to run for a specific time:
1. Touch FAN.
(once or twice)
2. Touch TIMER SET.
Once, display will show “TIMER”.
Twice, display will show “FAN”, then “HR : MN”.
NOTES:
•
Be sure you have set a time of day with the
Clock function before setting any Timer function.
•
If both the fan and light are operating and TIMER
is touched twice, both the fan and light will be
controlled by the timer. The display will alternate
between “FAN” and “LIGHT” one time before
“HR:MN” is displayed.
3. Set fan run time.
Example to run the fan for 1 hour and 30 minutes:
Touch “1 3 0” and display will show “1 : 30”.
4. Start Timed Fan Function.
Touch “START/ENTER” or “TIMER SET” and
display will show “F 1 : 30”.
NOTE: The letter “F” indicates the Timed Fan
feature has been selected. If both the Timed Fan
and Light feature have been selected, an “H”
(Hood) will be displayed.
At end of time, the current time of day will show
and no tones will sound.
To cancel the Timed Fan function:
NOTE: Touching TIMER OFF shuts off both the fan
and timed function. Touching FAN shuts off just the
fan.
