Whirlpool LSA 1300, Service Manual

Page: 25 / 32

RID#1 Main Function
RID#1 .1 LOAD SENSING
Load Sensing Animation
1) Decides the Required W
a) Evaluates
b) P1 (Daily Wash
this Load sensing
c) Finalize
between
d) Indication for Load sensing is by means of
RID#1 .2 BALANCE SPIN
1) Used to Distribute
2) Unbalance(Ub) checking Point:
a) During S
if the Off balance threshold value gets crossed within a specified tenure
then control move
b) Self Correction process will be processed once while detecting “Ub” for
the first time in a wash cycle.
c) During Self Correction p
be distributed by means of specified Wash Strokes.
RID#1 .3 KEY LOCK
1) In order to lock the Keys
that Keys will get Lock
2) Key lock can be invoke
3) There will be no response for any key press while the system remains in Key Lock
mode and the corresponding LED will blink 5 times.
4) In order to unlock, Press
5) During Errors, Keylock feature will get disabled
depending on the type of Errors.
RID#1 .4 6
th
SENSE
1) 6
th
Sense LED will be t
Water level program 6
2) 6
th
Sense LED will go to Off whenever Error pops up durin Auto Water Level
Program.
CONTROL COMPONENTS AND SPECIFICATION
Load Sensing Animation
Required Water level with respect to the Mass of Cloth Load
Evaluates the water level with dry laundry at the of wash
Daily Wash), P4 (Easy Iron), P6(Bed linen), P8(C
Load sensing process
Finalize the water level by slot sensor output data during
between 30-150 rpm
Indication for Load sensing is by means of “Auto” Water level LED.
istribute the Unbalanced Cloth Load.
checking Point:
During SIS, if the system fails to attain 50 to 150 R
if the Off balance threshold value gets crossed within a specified tenure
control moves to Ub error
Self Correction process will be processed once while detecting “Ub” for
the first time in a wash cycle.
During Self Correction process, Water will be filled & the cloth load will
be distributed by means of specified Wash Strokes.
the Keys, Press Delay End and Extra Rinse key simultaneously
Locked & the corresponding LED will start glowing.
invoked only when the system is in running mode
There will be no response for any key press while the system remains in Key Lock
mode and the corresponding LED will blink 5 times.
In order to unlock, Press Delay End and Extra Rinse key simultaneously
During Errors, Keylock feature will get disabled for Power & start/pause key
depending on the type of Errors.
Sense LED will be turned ON whenever Load sensing happens
Water level program 6
th
Sense LED will be Turned ON.
Sense LED will go to Off whenever Error pops up durin Auto Water Level
AND SPECIFICATION SERVICE MANUAL
Page | 25
to the Mass of Cloth Load
wash process
(Colors) will follow
output data during 60 sec of sensing
Water level LED.
IS, if the system fails to attain 50 to 150 Rpm / 150 to 300 Rpm /
if the Off balance threshold value gets crossed within a specified tenure
Self Correction process will be processed once while detecting “Ub” for
ater will be filled & the cloth load will
be distributed by means of specified Wash Strokes.
inse key simultaneously so
LED will start glowing.
d only when the system is in running mode.
There will be no response for any key press while the system remains in Key Lock
inse key simultaneously
for Power & start/pause key
happens i.e For Auto
Sense LED will go to Off whenever Error pops up durin Auto Water Level