9
Installation Instructions
FIG. 11
Clip
Channel
Single Bypass Valve
FIG. 12
CORRECT ASSEMBLY
Clip
Outside diameter
of clip channel on
single bypass valve
Outside diameter
of water softener
valve inlet & outlet
NOTE:
Be sure all 3 tabs of the clip go through the matching
holes on the water softener valve inlet or outlet, and
fully into the channel on the single bypass valve.
Make sure that the tabs are fully seated.
FIG. 13
Ground Wire
(not included)
Clamp
(2 - not included)
Electrical Shock Hazard
Prior to installation on metallic plumbing,
securely install two grounding clamps and a
#4 copper wire per installation instructions.
Failure to follow these instructions can result
in death or electrical shock.
GROUNDING INFORMATION
(for Installations on Metal Pipe)
The house main incoming water pipe is often used to
ground electrical outlets in the home. Grounding
protects you from electrical shock. Installing the water
softener with a plastic bypass valve will break this
ground. Before beginning installation, purchase and
securely install two grounding clamps and a #4 copper
wire across the location where the softener will be,
tightly clamping it at both ends, as shown in Figure 13.
NOTE:
Check local plumbing and electrical codes for
the proper installation of the ground wire. The
installation must conform to them. In
Massachusetts, plumbing codes of
Massachusetts shall be conformed to.
Consult with your licensed plumber.
FIG. 10
Brine Tank
Overflow
Elbow
Brine Tank
Overflow
Grommet
Brinewell
Cover
Brinewell
Float Stem
Stand
Tube
Brine
Valve
Salt
Storage
Tank
Brine
Tubing
Nut -
Ferrule
Nozzle
Venturi
Assembly
Brine
Tubing
Summary of Contents for LE18
Page 19: ...19 Notes ...
