manualshive.com logo in svg

Whirlpool KM-30 8178573, User Manual

The Whirlpool KM-30 8178573 is a high-quality kitchen appliance that delivers exceptional performance. With its innovative features and user-friendly design, this product ensures a seamless cooking experience. Easily access the comprehensive User Manual for this appliance, available for free download at manualshive.com. Unleash the full potential of your Whirlpool KM-30 8178573 with the help of this informative manual.

Share
Download
background image

5-3

H.V. DIODE

NOTE: Some inexpensive meters may indicate 

infinite resistance in both directions.

1. Unplug microwave oven or disconnect power.

2. Measure resistance (ohmmeter scale: Rx1k):

  • Forward: Normal: Continuity; Abnormal: Infinite
  • Reverse: Normal: Infinite; Abnormal: Continuity

Anode

Cathode

TURNTABLE mOTOR

1. Unplug microwave oven or disconnect power.

2. Remove wire leads.

3. Measure resistance (ohmmeter scale: Rx1k):
  • Turntable Motor—Normal: 2.7k-3.8k ohms (ap-

proximate); Abnormal: Infinite

TTM

Summary of Contents for KM-30 8178573























































Reviews:

No comments

Related manuals for KM-30 8178573

Philco PMD 3410 BIX Owner'S Manual preview
PMD 3410 BIX
Brand: Philco Pages: 73
Daewoo KOR-181G Operating Instructions Manual preview
KOR-181G
Brand: Daewoo Pages: 28
Maytag MMC5080AAB Owner'S Manual preview
MMC5080AAB
Brand: Maytag Pages: 22
NEFF B56CT64.0 Instruction Manual preview
B56CT64.0
Brand: NEFF Pages: 52
Magic Chef MCD790W Operation Instructions And Cooking Manual preview
MCD790W
Brand: Magic Chef Pages: 31
montpellier MON-MBIC250 Installation And Operating Instructions Manual preview
MON-MBIC250
Brand: montpellier Pages: 22
Montgomery Ward 743771 Instruction Manual preview
743771
Brand: Montgomery Ward Pages: 9
Rangemaster Elise SE 110 User'S Manual & Installation Instructions preview
Elise SE 110
Brand: Rangemaster Pages: 40
Russell Hobbs RHM1714 BC User Manual preview
RHM1714 BC
Brand: Russell Hobbs Pages: 36
ElectrIQ eiQCMW60L Instruction Manual preview
eiQCMW60L
Brand: ElectrIQ Pages: 17
montpellier MON-SFOP59MFGG Installation And Operating Instructions Manual preview
MON-SFOP59MFGG
Brand: montpellier Pages: 17
Convotherm ConvoSense 4 Original Operating Instructions preview
ConvoSense 4
Brand: Convotherm Pages: 34
Wolf PW422718 Planning Information preview
PW422718
Brand: Wolf Pages: 8
NEFF B1451N2GB How To Connect preview
B1451N2GB
Brand: NEFF Pages: 24
NEFF B2ACH7H.0B User Manual And Installation Instructions preview
B2ACH7H.0B
Brand: NEFF Pages: 36
Lamona LAM3404 User'S Installation Manual preview
LAM3404
Brand: Lamona Pages: 24
NEFF B27CS22 1 Series Instruction Manual preview
B27CS22 1 Series
Brand: NEFF Pages: 52
NEFF B15FS22 0 Series Instruction Manual preview
B15FS22 0 Series
Brand: NEFF Pages: 64

Brands by name

Popular brands

Load more brands