manualshive.com logo in svg

Whirlpool KM-30 8178573, User Manual

The Whirlpool KM-30 8178573 is a high-quality kitchen appliance that delivers exceptional performance. With its innovative features and user-friendly design, this product ensures a seamless cooking experience. Easily access the comprehensive User Manual for this appliance, available for free download at manualshive.com. Unleash the full potential of your Whirlpool KM-30 8178573 with the help of this informative manual.

Share
Download
background image

5-2

mAGNETRON

1. Unplug microwave oven or disconnect power.

2. Remove wire leads. Check that the seal is in 

good condition.

3. Measure resistance (ohmmeter scale: Rx1):
  • Filament terminal: Normal: Less than 1 ohm

4. Measure resistance (ohmmeter scale: Rx1k):

  • Filament to chassis: Normal: Infinite

Flament 

Termnals

Magnetron

F

FA

H.V. CAPACITOR

1. Unplug microwave oven or disconnect power.

2. Remove wire leads.

3. Measure resistance (ohmmeter scale: Rx10k):
  • Terminal to terminal: Normal: Momentarily indi-

cates several ohms, and then gradually returns 

to infinite.

  • Terminal to case: Normal: Infinite

Summary of Contents for KM-30 8178573























































Reviews:

No comments

Related manuals for KM-30 8178573

Daewoo KOR-8CBB5W Service Manual preview
KOR-8CBB5W
Brand: Daewoo Pages: 34
Black+Decker TOD3300 Series Use And Care Manual preview
TOD3300 Series
Brand: Black+Decker Pages: 12
Cafe CVM517P4MW2 Dimensions And Installation Information preview
CVM517P4MW2
Brand: Cafe Pages: 2
Hendi 227954 User Manual preview
227954
Brand: Hendi Pages: 48
Star Holman Ultra-Max UM1833A Installation And Operation Instructions Manual preview
Holman Ultra-Max UM1833A
Brand: Star Pages: 44
Gaggenau BOP 251 2 Series Instruction Manual preview
BOP 251 2 Series
Brand: Gaggenau Pages: 56
NEFF U17M42 5GB Series Instruction Manual preview
U17M42 5GB Series
Brand: NEFF Pages: 28
V-ZUG Miwell SL Operating Instructions Manual preview
Miwell SL
Brand: V-ZUG Pages: 64
Porter & Charles Microvent PLCEM044K10 Manual preview
Microvent PLCEM044K10
Brand: Porter & Charles Pages: 5
ProBreeze AF-04 Instruction Manual preview
AF-04
Brand: ProBreeze Pages: 16
baxter OV210 Series Operation Manual preview
OV210 Series
Brand: baxter Pages: 20
Russell Hobbs RHEM36G Instructions And Warranty preview
RHEM36G
Brand: Russell Hobbs Pages: 22
Narita NO-1300 Instruction Book preview
NO-1300
Brand: Narita Pages: 9
Galileo Texas 11 2420117 Manual preview
Texas 11 2420117
Brand: Galileo Pages: 20
Kuppersbusch EMWK 870.1 Service Manual preview
EMWK 870.1
Brand: Kuppersbusch Pages: 14
Fagor FG299 Instruction Manual preview
FG299
Brand: Fagor Pages: 16
Maytag MMW9730AB00 Use & Care Manual preview
MMW9730AB00
Brand: Maytag Pages: 48
IAG IOE6SE1 Manual preview
IOE6SE1
Brand: IAG Pages: 26

Brands by name

Popular brands

Load more brands