4-8
REMOVING THE SEPARATOR
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
1. Remove the two screws securing the
separator to the mullion rail, see figure 1.
2. Push up on the bottom of the separator
from the freezer section to free the
separator from the cabinet, see figure 2.
3. Slide the separator out of the cabinet.
NOTE:
The separator can be removed with
the side rails in place but it is easier if the
rails are removed, see figure 3.
4. Remove screws around the perimeter of
the evaporator cover securing it to the
cabinet, see figure 4.
Figure 1
Figure 2
Figure 3
Figure 4
Summary of Contents for JUD248CCCR
