10
GB
WEIGHT SENSOR
T
HIS
MICROWAVE
OVEN
USES
THE
WEIGHT
SENSOR
TECHNOLOGY
for some 6th sense functions (Defrost, Crisp
and Steam); when you select one of these 6thSense functions, you just need to select type of
food you want to process and press start: the microwave automatically detects the weight of
food and set the cooking time accordingly.
D
URING
THE
SENSING
PHASE
weight icon blinks and progress bar shows the
weight calculation process (see sample below, from 6th Defrost function).
WEIGHT SENSING CALIBRATION
Weight sensor technology requires a Calibration process before fi rst use.
Suggest user to make the calibration once a year.
T
HE
CALIBRATION
PROCESS
MUST
BE
DONE
with only the Turn Table glass in the cavity.
P
RESS
AND
HOLD
for few seconds the Stop TurnTable button.
T
HE
CALIBRATION
PROCESS
starts and the display shows:
-- weight icon blinking
-- calibration progress bar
W
HEN
THE
CALIBRATION
PROCESS
is fi nished, the Microwave returns to stand by mode.
SET CLOCK
W
HEN
THE
APPLIANCE
IS
FIRST
PLUGGED
IN
or after a power failure, the
product will enter clock setting. If the clock is not set, the display
will remain “:“ instead of the clock.
NOTE:
YOU
CAN
P
RESS
&H
OLD
FOR
A
FEW
SECONDS
THE
S
TOP
BUTTON
in
standby mode to access the clock setting mode.
T
URN
THE
A
DJUSTABLE
KNOB
to set the hours.
P
RESS
KNOB
BUTTON
.
(The two right-hand digits (minutes) flicker).
T
URN
THE
A
DJUSTABLE
KNOB
to set the minutes.
P
RESS
THE
KNOB
BUTTON
AGAIN
.
T
HE
CLOCK
IS
SET
and in operation.
I
F
STOP
is pressed in clock setting mode, the clock will be disabled
the display shows “:“.
N
OTE
: K
EEP
THE
DOOR
OPEN
WHILE
SETTING
THE
C
LOCK
.
This gives you 10
minutes to complete the setting of the Clock. Otherwise, each step
must be accomplished within 60 seconds.
