Whirlpool HSCX90424, User Manual

Page: 6 / 20

6
• Cycle end signal
This option activates a prolonged buzzer at the end of the
cycle. Enable it if you are not sure to hear the normal sound at the
end of the cycle.
This option remains in memory, if selected in the previous drying.
Heat Pump System
contained in a hermetically sealed unit. This sealed unit contains
0.18 kg of the F gas R134a. GWP = 1430 (1 t C02).
Power consumption
0.50
left-on mode (Pl) - Watts 1.00
Program me s Kg kWh Minutes
Eco Cotton*
9 2.07 211
Eco Cotton
4.5 1.19 131
Synthetics
4 0.73 95
* This is the reference programme for the energy label and suitable
programme in terms of energy consumption for drying wet cotton
TRANSPORT AND HANDLING
Never lift the dryer by holding it at the worktop.
1. Unplug the dryer.
2. Make sure that door and water tank are properly closed.
drain hose on the rear of the dryer again (see Installation Guide).
B A
1
4
2
3
C
PRODUCT DESCRIPTION
1.
Water tank
2.
Air intake
3.
4.
CARE AND MANTENANCE
Unplug the dryer during the cleaning and maintenance
procedures.
Emptying the water tank after each cycle (see Fig. A).
Pull the container out of the dryer and and empty it into a
sink or other suitable drain, then place it back. Do not use the dryer
without having inserted the container back in place.
Cleaning the doo lter after each cycle (see Fig. B).
back in place. Do not use the dryer without having reinserted the
1. Open the door and pull upwards.
Cleaning the bottom lter when the relevant indicator
turns on (see Fig. C).
it under run n ing water or by using a vacuum cleaner.
optimise drying performance. Do not use the dryer without having
1. Open the lower door.
inner surface of the mesh.
The filters are essential parts for drying. They are intended
to collect the lint formed during drying process. In case
of clogge lters, the air flow inside the dryer would be
seriously affected: the drying times would be longer, the
energy consumption would increase and the dryer could be
damaged. If these procedures are not carried out properly,
the dryer may not start.
with the leaves.
checking it is perfectly integrated in place.
7. Make sure the air intake is free.
• Rapid
Enables quicker drying.
• Gentle
Enables a more gentle treatment of the laundry by reducing the
drying temperature.
Cycle Options
These buttons serves to access a menu of available options
(see below ). After having pressed the button, turn the knob
to select the option and press it to confirm.