Whirlpool HAS2831S, Health & Safety, Use & Care And Installation Manual

Page: 8 / 24

5
H
OOD
O
PERATION
(1) Press to power on the fan and press again to turn off.
1. On/Off
2. Light Switch
3. Fan Speed Up
4. Fan Speed Down
5. Steam Clean
LW CR
(1) Press this button to turn on and off the light.
(2) The light is operated independently and not controlled by
On/Off button.
(1) Press this button to increase the fan speed from 1
→
2
→
3.
(2) Every time when turn on the machine, the hood is operated at
the fan speed chosen at the last time.
(1) Press this button to decrease the fan speed from 3
→
2
→
1.
(2) Every time when turn on the machine, the hood is operated at
the fan speed chosen at the last time.
(1) Cleaning Steps:
(a) Add water to the provided water jar as shown
in the picture (Fig. A). Never put detergent as it can
damage the hood. For each refill, please add water
to the waterline marked in the water jar.
Otherwise, excessive water will be spillover from
the oil cup.
(b) Open the water inlet hole by moving the water inlet
cap leftward or rightward (Fig. B), then pour the
water from the water jar into the hole as shown in
the picture.
(c) Press “Steam Clean” button to start the process.
The button light keeps on throughout the cleaning
process which lasts for around 6-8 minutes.
The “Steam Clean” button light is off after the process is ended.
Fig. B
Fig. A
Water inlet