7
1. Connect the 2 black wires together using a UL listed wire nut.
2. Connect the 2 red wires together using a UL listed wire nut.
3. Connect the factory crimped white and green (or bare) ground
wires of the oven cable to the white (neutral) wire in the
junction box using a UL listed wire nut.
4. Install junction box cover.
5. Reconnect power.
Install Oven
1. Lift oven into cabinet cutout using the oven opening as an
area to grip.
NOTE: Push against seal area of oven front frame when
pushing oven into cabinet. Do not push against outside
edges.
2. Push against seal area of front frame to push oven into
cabinet until shipping feet almost contact cabinet.
3. On some models, use a Phillips screwdriver to remove screws
attaching shipping feet.
4. Push oven completely into cabinet and center oven into
cabinet cutout.
5. Securely fasten oven to cabinet using the screws (2 for single
oven, 4 for double oven) provided. Insert the screws through
holes in mounting rails. Do not overtighten screws.
6. On some models, the oven vent is taped to the side of the
oven. See following instructions to install.
a). Insert the vent tabs (B) into slots (A) in the oven frame.
b). With one screw (C) for each side of the vent, fasten vent
securely to the oven.
7. Slide top end of each trim upward onto oven side rails.
A. Shipping foot
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
A
A. Mounting rail
B. Insert screw
A. Oven frame slot
B. Vent tab
C. Screw
A
B
A
B
C
