Whirlpool FSCR 10431, Health & Safety, Use & Care And Installation Manual

Page: 28 / 54

28
DOSING AID
See separate section Dosing Aid – first
use / daily use .
FINISH IN
Moves the end of your programme
to a later time . Helps to profit from
more favourable energy rates (for
example during the night), or to have
the laundry ready at a certain time .
Do not use liquid detergent with this
function .
Choose a delay up to 23:30 hours .
• Select programme, temperature
and options .
• Press the “Finish in” button –
the symbol over the button
blinks .
• Turn the knob to select a delay up
to 23:30 hours, which will be shown
on the display . Confirm the desired
delay by pressing the knob . The
symbol over the finish in button
lights up solidly .
• When you have finished your
settings, press “Start / Pause”
– the light over the button
lights up solidly . The display shows
the countdown of the time until
end of the programme . The door
locks .
• After the delay phase, the
programme starts automatically .
The display then indicates the
remaining programme duration .
To cancel the delay
• either press “Start/Pause” to cancel
the delay; to start the selected
programme immediately, press
“Start/Pause” again
• or press and hold “On/Off” to cancel
the complete programme setting .
SETTINGS The following settings can be
changed:
Language (= display language) /
key tones / cycle end alert / display
contrast / water hardness / dosing
aid (adjust dosing amounts for the
detergents you use) / eco mode
(automatic switch-off function after
programme end) / factory settings (=
return to factory settings) .
• Press and hold the Programme
button for at least 3 seconds .
• Turn the knob to select the setting
which you want to change; it
appears on the display . Confirm it
by pressing the knob .
• Turn the knob to adjust the setting;
confirm by pressing the knob .
• To exit the Settings mode, either
turn the knob until the display
indicates that you can exit – then
confirm by pressing the knob . Or
alternatively press the Programme
button .