![Whirlpool DS201HB Operating Instructions Manual Download Page 52](http://html.mh-extra.com/html/whirlpool/ds201hb/ds201hb_operating-instructions-manual_432887052.webp)
50
Trouble
shooting
Noisy
Water leakage
The humidity
shows on display
is different from
hygrometer
Power Cord or plug
generate abnormal heat
• The sound is generated due to the air flow especially in HIGH fan speed.
The sound level varied with the environment but the efficiency is not
affected.
• Sound will be generated when starts up. It is due to the operation of
compressor. It is not a malfunction.
• The volume of sound is differs depending on the louver angle.
• Check if the
machine
is placed on a flat surface.
• Check if the rear panel is in proper position
• Check if the air inlet and outlet is blocked. If yes, remove the barrier and
make sure there is enough space for the
machine
[P.38]
• Check if the filter is dirty. Clean the filter [P.4
7
]
• Check if the water tank is in proper position. Check if the
machine is
place in a flat surface.
• If under continuous drainage, check the hose inserted in the drainage
hole properly.
• Whether the water tank pull out the water empty, causing the machine
having the remaining water inside the machine.
• Try the plug into another plug socket to see whether still have the same
situation or not.
• Stop using the
machine
immediate and contact customer services for
help.
Problem
Possible Cause & Solution
•
The display shows the humidity level at its current position , which may
be different from the level at other position.
•
The humidity level shows by the product contains tolerance , which is
normal. And it should not be compared with the hygrometer directly.