6
5019 307 01587
(Subject to technical modifications)
Reset
During the selection phase of the
programme, pressing this button will
switch off all settings of selected
options. During running drying cycle
the pressing of the button will stop the
cycle and set the dryer back in
selection mode.
The button needs to be pressed for 3
seconds.
Key lock
For child protection reasons, this
option can be used to lock all
functions of the user interface.
To activate this option, the button
needs to be pressed for 3 seconds,
until the “key” symbol at the display
appears. To deactivate this option,
press the button until the “key”
symbol disappears.
The key lock function is still active
even when the selector knob is turned
to “off” position or the door is opened.
The function has to be deactivated.
Dry time adjustment
Turn the programme selector knob to
“Drying Time”
position. Press the
button “Drying time” to select the
duration of cycle in ten minutes steps
up to 180 minutes.
Drum light
The drum light can be switched on
and off.
Anticrease
This option can be chosen to reduce
wrinkling, when the laundry is not
unloaded directly after end of the
cycle. The drum turns from time to
time for maximum 12 hours. It can be
interrupted at any time by switching
off the dryer. This option deactivates
the “Buzzer” function, if it is activated.
Gentle
Selecting this option will reduce the
drying temperature. This option
cannot be selected when the option
“Rapid” is selected.
Finish in
With this function you can postpone your
programme to complete at a later time:
press the button to select in how many
hours the programme shall be finished.
• Thus, it allows you to have your
laundry ready at a particular time and
to profit from more favourable
energy rates during the night, for
example.
• The “Finish in” function can be
selected in full hour time segments
(1 to 24 h). When you press the
button, the shortest possible time
will be displayed; keep on pressing
the button to loop through all the
available times. To remove it again,
set the index of the programme
selector knob to the “Off” position.
• When you have selected the desired
“Finish in” time, press
“Start (Pause)”
- the countdown will begin.
• During the countdown, you can still
modify the option setting (select or
deselect options).
• Sometimes the programme may
finish before the selected “Finish in”
time has expired (e.g. for small
loads). In this case, the dryer will
tumble the laundry regularly to
keep it fresh, until the selected
“Finish in” time has expired. During
tumbling, the display will show an
animation. The tumbling phase can
be stopped at any time either by
pressing any button, by rotating the
programme selector or by opening
the door.
