background image

1

Machine operation

Additional information (including troubleshooting and service) can be found in the individual chapters of the 
instructions for use.

Sort by:

Material thickness: Whenever there is greater load than the dryer can handle, 
separate laundry according to weight (e.g.  dry towels and thin underwear 
separately).

Type of material: Cotton (linen); synthetic textiles (easy care).

Degree of drying: Cupboard dry, iron dry etc.

Do not tumble dry: Woollens, silk, nylon stockings, delicate embroidery, fabrics 
with metallic decorations, bulky items such as sleeping bags, etc.

Check that all fastenings are closed and that pockets are empty. Please ensure that 
there are no cigarette lighters in the wash. Turn laundry inside out.

Pull the door handle. If the child safety lock is activated, please deactivate it 
(additional information can be found in the “Door Reversibility/Child Safety Lock” 
chapter of the instructions for use).

Place laundry loosely in the drum to achieve equal drying throughout. Then close 
the door.

Select the drying programme required by turning the programme selector knob 
(for information, refer to programme table).

Select the option required by pressing the corresponding button.
The indicator lamp above the relevant button lights up to confirm your selection. An 
alarm sounds if an incorrect selection is made (incompatible options). Press the 
button again to cancel the option.

The drying programme is started by pressing the “Départ (Pause)” button. 
The relevant indicator lamp lights up.

Changing programme selection: If the programme selected is changed during 
drying, the dryer stops. The “Départ (Pause)” indicator lamp flashes. To operate 
the new programme, again press the “Départ (Pause)” button.

Interrupting programme: To interrupt the dryer during the drying cycle, set the 
programme selector knob to “

” and press the “Départ (Pause)” 

button. Wait at least 5 minutes before opening the door to allow the dryer to cool 
down. For your safety the drying cycle stops automatically if you open the door. To 
restart, after door opening, close the door and press the “Départ (Pause)” button 
again.

 End: Take the laundry out of the dryer. The drying process is complete 

and the anti-crease phase has been reached (active).

 Anti Crease: If the laundry is not removed at the end of the drying 

cycle, an automatic anti-crease cycle will operate for maximum 60 min. 
The drum rotates at regular intervals to prevent the laundry from 
creasing.

Set the programme selector knob to “

”.

Cleaning the lint filter: Open door, pull lint filter up and out of machine and open 
it. Brush lint using a soft brush or your fingertips. Close lint filter and push firmly 
back into place.

Emptying water container: Pull container out by the handle and empty. Replace 
the container when empty by pushing it completely back into place.

If required, activate child safety lock (additional information can be found in the “Door 
Reversibility/Child Safety Lock”
 chapter of the instructions for use).

Please note: Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover 
thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.

Sort laundry according to 

care symbols:

Do not  tumble dry

Suitable for tumble drying -

Suitable for tumble drying

at low drying temperature

Preparing laundry

Opening door

Loading dryer and

closing door

Switching on machine and 

selecting programme

Selecting options 

(if available)

Starting dryer

Programme end -

unloading dryer

Switching dryer off

Summary of Contents for AWZ 9995

Page 1: ...lculated value which will be updated during the drying programme The flashing lines indicate that the calculation is running The remaining time will be updated Overdry protection The indicator lamp lights up when a humidity controlled programme is selected to indicate the working protection function Function is not active in time controlled programmes 20 40 60 and Programme sequence Overdry protec...

Page 2: ...in press the Départ Pause button Interrupting programme To interrupt the dryer during the drying cycle set the programme selector knob to and press the Départ Pause button Wait at least 5 minutes before opening the door to allow the dryer to cool down For your safety the drying cycle stops automatically if you open the door To restart after door opening close the door and press the Départ Pause bu...

Page 3: ...irts work clothes 3 0 7 0 X X X X X 60 110 50 85 Cupboard dry Laundry with thick multi layered areas such as bed and table linen track suits anoraks blankets Synthetic mixed fibre or cotton easy care ironing not required laundry Max 2 5 kg 1 0 2 5 X X X X 30 55 25 45 Cupboard dry Laundry which does not require ironing such as shirts blouses T shirts sportswear 1 0 2 5 X X X X 25 45 20 35 Iron dry ...

Page 4: ...r use Is the room temperature too high Are the END and Anti crease indicator lamps lighting up The drying cycle is complete and the laundry can be taken out The dryer will not operate after a power failure always press the Départ Pause button Is the plug properly inserted into the mains electricity socket Is there a power failure Has the fuse blown Is the door properly closed Has a drying programm...

Reviews: