Whirlpool AWM 6100, Service Manual

Page: 20 / 22

WHIRLPOOL CONSUMER SERVICES
Model AWM6100
Page 20 of 22
FAILURE DURING NORMAL OPERATION
If a failure is detected during normal operation, the machine will stop, the programme sequence
LED where the failure occurred will flash and the speed indicator LED's will illuminate in a
pattern to indicate the fault code.
FAULT CODES
Failure 1 3 5 6 7 9 11 14 16 18 20 21
Speed
LED's
Fault Detected Malfunction Perform the following:
1 Water not entering or not detected Check tap, cold inlet valve, pressure switch
3 Drain failure or not detecting
empty drum Check pressure switch, blocked drain, drain
pump
5 NTC failure Check NTC
6 Tachometer failure (no motor
movement detected Check motor
7 Circuit board failure (motor triac) Replace timer
9 Drain failure Check drain pump, pressure switch, blocked
drain
11 Electronic failure Replace timer
14 Electronic failure Replace timer
16 Control failure Replace timer
18 Control failure Replace timer
20 Control failure Replace timer
21 Control failure Replace timer