12
Introduction for buttons on remote controller
Parts Identification & Operations
Power button
:
Press this button to turn on the unit. Press this button again to turn off the unit.
Mode button
:
Each time you press the button, a mode is selected in a sequence that goes from 6TH
SENSE, COOL, DRY, FAN, as the following:
*When it turns to 6th sense, display screen will show the words "Auto", and the temperature will set at 25°C.
*Dry mode will operate at low fan speed level.
-
:
Press this button to decrease set temperature. Hold it down for above 2 seconds to rapidly decrease
set temperature. In 6TH SENSE mode, set temperature is not adjustable.
+
:
Press this button to increase set temperature. Hold it down for above 2 seconds to rapidly increase
set temperature. In 6TH SENSE mode, set temperature is not adjustable.
Combination of "+" and "-" buttons
: About lock
Press "+" and "-" buttons sim
u
ltaneously to lock or unlock the keypad.
Timer
:
Press this button to initiate auto-on/auto-off timer. To cancel auto-timer program, press
this button twice.
Swing button
:
Press this key to activate or deactivate the swing.
Sleep
:
Press this button to go into the SLEEP operation mode. Press it again to cancel this function.
This function is available in COOL, or DRY mode to maintain the most comfortable temperature for you.
During SLEEP mode, set temperature will increase 1°C after 1 hour, increase 1°C more after 2 hours then keep
steady.
Speed 1
Speed 2
Speed 3
Speed 4
FAN
COOL
6th sense
DRY
6th sense
then back to Auto.
Fan speed button
:
This button is used for setting Fan Speed in the sequence that goes from 6TH SENSE, ,
If it is not a specific model, the speed 1 or speed 2 refer to low cool fan speed, while
s
peed 3 or
s
peed 4 refer to high cool fan speed.
t
o
Summary of Contents for AWA07520N
Page 2: ......
