warm water containing soap or dishwashing detergent and wipe dry. Put the rubber sealing gasket
back into the place.
High temperature in appliance, the compressor operation pauses are short. Ascertain
whether the appliance door is shutting tightly, whether the door wasn’t kept open longer than
necessary when taking out or putting in foodstuffs, or whether a large amount of warm food was
placed in the appliance.
The top of the appliance has condensation on it. The ambient relative air humidity is above
70 %. Ventilate the room where the appliance stands, and if possible remove the cause of the
humidity.
W A R R A N TY SER VIC E
! IF YOUR APPLIANCE IS NOT WORKING PROPERLY,
ASCERTAIN WHETHER YOU CAN REMEDY THE CAUSE OF
THE FAULTY FUNCTIONING OF THE APPLIANCE
YOURSELF. If you cannot solve the problem yourself,
contact the nearest refrigerator service representative by
telephone or in writing. When making contact, necessarily
indicate the refrigerator model 1 and number 2. You will
find this data on the product label, which is glued to the
wall of the refrigerator compartment.
Not included in warranty:
Causes not being related directly to the appliance such as.
Damage occurring during transport or because of wrong usage such as dents, scratches, broken
parts.
Installation errors (such as wrong voltage).
Malfunctioning because of improper usage, dust/fluff in and on the appliance, amongst others
blocking of air circulation, as well as breaking of plastics, rubber, glass which other than by normal
use has gone defect, such to be judged by the service man and or importer.
Warranty rights are not transferable.
If appliance is offered for servicing it needs to be clean, otherwise service can be refused.
TR A N SPO R T
! THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO THE APPLIANCE THAT
RESULTS FROM NON-COMPLIANCE WITH THE INSTRUCTIONS FOR TRANSPORTATION.
The appliance should be transported only in the vertical position.
When being transported, the appliance should be protected from atmospheric conditions (rain,
snow, dampness).
The appliance should be firmly secured in place while being transported, to avoid slippage or any
shocks in the transport vehicle.
If the appliance was transported not vertically, it may be connected to the mains after 4 hours at
least. If this is not done, the appliance compressor may fail.
EN VIR O N M EN TA L PR O TE C TIO N IN FO R M A TIO N
This symbol indicates that once the appliance is no longer needed, it cannot be disposed
together with other miscellaneous municipal waste. It should be collected and eliminated
separately, i.e. in containers specially marked with this symbol in large-dimension rubbish
collection areas.
Full information on where to submit the old appliance safety can be obtained from local government
authorities, the shop where you bought the appliance, or the manufacturer’s representatives.
If you decided to scrap the appliance, make it impossible to use in order to prevent possible
misadventure. Pull out the electric plug from the electricity supply socket and then cut off the cord.
Tear off the gasket. Break the door lock if any.
WARNING! Do not dismantle the appliance yourself. Pass it on to recycling companies.
8
GB
