33
Notes
• Sliding Window
1.
Remove the appropriate plugs (save in a secure place) from the window slider to prepare for either a double hung
window installation or a slider window installation. Line up the holes on the rain cover and the window slider.
Use the bolts, gaskets and nuts to attach the rain cover onto the window slider.
2.
Attach the exhaust adapter to the window slider. Then fix the window slider and the slider arm and (or) the third
piece of the slider to the window stool.
3.
Insert the end of the hose into the exhaust adapter and rotate it several times to thread it securely into the
adapter.
4.
Attach the unit end of the exhaust hose to the back of the air conditioner by pushing it into the exhaust outlet and
twisting to lock it in place.
Now, plug the power cable into a grounded electrical socket. Press the
button to start the appliance.
Note: Do not use a standard extension cable. If necessary, use an approved "air conditioner" extension cable only
(available at most local hardware shops).
Remove these
two plugs from
the window
slider
Inside
Window slider
Third piece of slider
Slider arm
• Please read this manual before installing and using the portable air conditioner.
• Do not let air enter the refrigeration system or discharge refrigerant when moving the air conditioner.
• Test run the air conditioner after finishing installation, and record details of operation.
• The PCB unit uses a fuse with rating 3.15 A, 250V.
• Users must provide an appropriate fuse for the current supplied at maximum power input or use.
