6
ELECTRICAL CONNECTION
BEFORE USING THE OVEN
For best use of the oven please read the
instructions for use carefully and keep them
in a safe place.
Remove the cardboard protection and the
protective plastic film.
Take the accessories out of the oven and
heat it to 200°C for about an hour to remove
the smells and fumes of insulating material
and protective greases. Keep the window
open during this operation.
HINTS FOR PROTECTING THE ENVIRONMENT
1. Packing
The packaging material is 100% recyclable
and it is marked with the recycle symbol
(
).
2. Electrical appliances
The electrical appliances are manufactured
with recyclable or reusable material.
Dispose of them following the local
regulations for the disposal of waste. Before
disposing of them make them unusable by
cutting off the supply cable.
Warning: Do not connect to the power supply before
you have finished connecting the oven.
Make sure the oven is installed and connected to the
electricity supply by a qualified technician in
accordance with the manufacturers instructions and
in compliance with local regulations.
The installer is responsible for the correct electrical
connection of the oven and the observance of the
relative safety regulations.
The oven must be connected to the electricity supply
by means of an all-pole disconnect switch with
minimum contact gap of 3 mm.
The oven must be grounded.
Do not use multiple plug adapters or extension leads.
After the oven has been installed, the electrical
components must be inaccessible.
Make sure that the voltage shown on the rating plate
is the same as the power supply voltage in your home.
The rating plate is on the front edge of the oven cavity
(visible with oven door open).
3gb66002a.fm5 Page 6 Wednesday, April 3, 2002 2:32 PM
