8
Recirculation Mode
Caution: Do not use plastic or rigid metal ducting.
1. Determine the length of the compressed flexible aluminum
ducting. Attach an adequate length of
150mm round duct
to the air outlet adapter.
2. Install the charcoal filter on.
3. Please note that the air will flow out from the two grids on the
sides of the decorative chimney top.
Electrical Connection
* Electrical wiring must be done by a qualified person(s) in accordance with all
applicable codes and standards.
Turn off electrical power at service entrance
before wiring
.
* If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
* Do not use the plug and an extension cord other than the ones initially supplied with
the hood.
* The earthing of this hood is compulsory. Do not remove ground prong of the plug.
TELESCOPIC CHIMNEY COMPRISING ASSEMBLY
Decorative Chimney Top
Raise the decorative chimney top 2.1 up inside the decorative
chimney bottom 2.2. Secure decorative chimney top 2.1 to the
chimney mounting bracket 6.1 that is well fixed on the wall with
the two chimney bracket screws 9.b supplied from two sides.
Decorative Chimney Bottom
1. Carefully slide the decorative chimney bottom 2.2 down outside the decorative
chimney top 2.1. Carefully place the decorative chimney
bottom 2.2 into the recessed area of the hood body top.
2. Fix the Decorative Chimney Bottom 2.2 with the three
decorative Chimney Bottom screws 9.c supplied from
inside of hood body.
