Fill the detergent dispenser
How to use All-in-1 function
How to use Alt function
How to use Delay start function
Check the rinse aid level
Running the dishwasher
Switch off the appliance
Changing the programme
Add forgotten dishes in the
dishwasher
If the appliance is switched
off during a wash cycle
Switch on the appliance
Select a program
Load the baskets
For detailed operating method read the corres ponding content on the instruc tion manual.
Compartment
With each wash cycle.
Compartment
With pre-wash only.
T urn on the water tap and press the Start/Pause key-press. The machine will start working
after about 10 seconds.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Close the door, press the Program key-press and the selected program light will light up.
( See the section entitled
Operationg instruction
.)
“
”
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the Power key-press.
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
from the first step.
Note: If you want to power off the dishwasher while it is running, you must press Start/pause
key-press to pause first, then press the power key-press to turn off the power
Press the Power key-press to switch on the appliance. Open the door.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Pause key-press to pause, the press the program key-press for more than 3 seconds to
cancel the running program.
3. Select a new program.
4. Restart the dishwasher.
1.
2.Open the door.
3.Add the forgotten dishes.
4.Close the door,
the dishwasher will
start running again after 10 seconds.
Press START/PAUSE key-press.
Press START/PAUSE key-press,
(Refer to the
Fill the Detergent and Rinse Aid dispensers
section.)
“
”
Press the Alt key-press to select the function. (Only programs of auto, intensive, heavy, normal or glass
can select the function.
Note: While the dishwasher is running, If the upper and lower spray arm indicators are both
light, that means the two arms are a
When select the function, the lower spray arm runs or the upper arm
runs only , or lower spray arm and upper arm run alternately . These will be displayed in the
display Window .)
lternate washing, but if they are both off, that
means the two arms are running simultaneity;
Press the All-in-1 key-press to select the function. (Only programs of auto, intensive,
heavy or normal can select the function.)
Press the Delay key-press to delay the start of washing, one press add half an hour, and you can
delay the start of washing up to 9.5 hours.
Ope n the door ca refully.
Hot steam may e scape
whe n the d oor is opene d!
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better. Unload the appliance, starting from the lower basket.
Turn off the water tap,
unload the baskets
Or via the Mechanical indicator
Electric indicator on control panel.
Note:If you want to power off the dishwasher while it is running, you must press the
Start/Pause key-press to pause the dishwasher first, then press the power key-press
more than 3 seconds to turn off the power.
Summary of Contents for ADP9000
Page 1: ...ADP9000 ...
