11
If th e display wind ow shows erro r code after the warning sound, that ind icates that the machine is
out of order, p lease note do wn the error code, turn off the main power and water supply before
cal ling for a service (see the sect ion entitled
Error code s
).
“
”
If you open the door
, the machine will pause. The program light
will stop blinking and the buzzer will sound every minute unless you c lose the door .
After you close the door ,the machine will keep on working after 10 seconds .
during a wash cyc le
Premise:
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water.
If this is the case, the detergent dispenser must be refilled.
Press the Start/Pause key-press and then press the program key-press for
to put the
machine in a standby state. On in standby state, you can change the program to the desired cycle setting
(see the section entitled " Starting a washing program" ).
more than 3 seconds
The Display window shows the state of the dishwasher
a) The Display window shows "H:MM" and not blinking --> In standby state or pause;
b) The Display window shows "H:MM" and blinking --> run.
>
c) The Display window shows error code-- error (see the section entitled " Error codes " ).
1
2
3
When you press the Start/Pause k ey-press to pause the dis hwasher dur ing washing,
the dishwasher will sound every minute unless you press the Start/Pause keypress to
start the dishwasher.
Starting a cycle was h
Close the door, press the power key-press, and the power indicator light will turn on.
Press the program key-press to select the desired wash program, then press the Start/Pause key-press
and the dishwasher starts.
O pen the door, draw
out the lower and upper basket, load the dishes and push them back.
It is recommended to load the lower basket first, then the upper one (see the section entitled
Loading the Dishwasher
).
Pour in the detergent (see the section entitled
Detergent and Rinse Aid
).
“
”
“
”
Ensure that the dishwasher is connected to the power supply, the water is connec ted and
turned on and the drain hose is connected correctly.
1
2
3
4
5
Wh en th e workin g cy cle has finis hed, the bu z zer o f th e d is hwa sh e r will sou nd f or 8 sec o nds , the n st op . Turn off
the app lianc e us ing the p owe r ke y-pr ess, shu t off the wate r su pply an d op e n th e d o or o f th e dish was her.
Wait for a fe w m inute s b e fore u nloadi ng the d ishw ash er to avo id ha ndl ing t he d ishe s an d ut ensi ls while they
are still hot and more sus ce p tible to b reak age . Th ey w ill a lso d ry b etter.
Switch Off the Dishwasher
1.Switch off the dishwa sher by p ressing the power k ey-press.
2.Turn o ff th e wate r tap.
Open the door carefully
Hot dishes are sensitive to kn ocks. The dishes shou ld therefore b e allowed to cool down be fore removing from
th e appliance.
Open the d ishwasher's door, leave it aj ar and wait a few minutes before remov ing the dishes. In th is way they
will be cooler an d the drying will b e improved.
A forgotten dish can be added any time before the detergent dispenser opens.
Add forgotten dishes.
Close the door.
After the spray arms stop working, you can open the
door completely.
2
3
1
4
5
Press the START/PAUSE button.
Press the START/PAUSE button, the dishwasher will run
after 10 seconds.
It is dan gero us to ope n th e do or w hen washing, bec ause the hot wate r ma y s cald you .
Summary of Contents for ADP9000
Page 1: ...ADP9000 ...
