background image

GB -4-

A - Two trays for

cutlery

(In some models only)
B - Adjustable glass holder

How to adjust upper 
rack height
 (if available) 
-

it could be useful to 
lift up upper rack to 
have more space in 
lower rack or bring 
it down to load long 
stem glasses.

-

Grasp and take out 
the two lateral 
handles (C) must be 
on same level and lift 
up or take down the 
upper rack.

How to remove cutlery and/or upper rack 
(if available) 
-

it could be useful to remove cutlery rack to 
load stem glasses in upper rack and/or remove 
upper rack to load bulky items in lower rack. 

-

Open the two retainers (D) to take off the 
upper rack. When the upper rack is in place the 
retainers must always be closed.

D - CLOSED

Position 1

Position 2

D - OPEN

To allocate the cutlery rack in position 2 bring 
the upper rack down (see description at right).

4

Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Only use dishwasher-proof crockery and dishes. Do not use the dishwasher for washing wooden 
items, aluminium, tin, silver cutlery or decorated crockery (unglazed). In the baskets, dishes (e.g. plates, bowls, pots) must be placed in a correct way to let water flow down!

Thanks to the special water 
jets, Power Clean allows 
intensive washing dedicated 
to pots and casseroles

How to use Power Clean

1. Adjust the Power Clean area (F) folding down the rear 
plate holders to load pots.

2. Load pots and casseroles inclined vertically in Power 
Clean area. Pots have to be inclined towards the 
power water jets.

E - Vertical plate holders: They can be folded 
down to load pots.

How to load LOWER RACK

E

F

How to load CUTLERY RACK

How to load UPPER RACK

Switching on the appliance

5

Summary of Contents for ADP 81 ASC









Reviews: