background image

GB -3-

Daily check

2

3

Rinse aid indicator (depending on model)

The indicator lamp on the control panel lights up when RINSE AID NEEDS 
TO BE ADDED.

dark: OK.

clear: NEEDS TO BE ADDED

Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the 
appliance.

If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). Plastic dishes have more difficulty 
drying and a higher rinse aid setting will not improve the situation.

Detergents with rinse aid incorporated may be effective only with longer programmes. In the case of shorter programmes, detergent residue may be a problem (if necessary, use powder detergent). Detergents 
with rinse aid incorporated tend to form excess suds.

If required, open 
the cover 
(press lever).

Open the cover A 
(press lever).

Only fill the 
detergent dispenser 
prior to starting a 
wash programme.

Use one tablet per one cycle, only placed in 
detergent dispenser.

All types of tablets can be used, but for 2 in 1 
type adding of salt is mandatory.

Tablet / gel / powder

Add rinse aid 
to max. 
line ~100 ml

The rinse aid dosage can be adjusted to the 
detergent used. The lower the setting, the less 
rinse aid is dispensed (factory setting: position 4).
Press the lever to open the cover. Using a coin or 
similar object, turn the arrow to the desired 
setting. After adjusting the rinse aid setting, shut 
the cover again.

Visual 
indicator B

Daily use

Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations.

Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator

Summary of Contents for ADP 81 ASC









Reviews: