background image

11

1.   Removing the packaging and check

After unpacking, make sure that the 
dishwasher is undamaged and that the door 
closes correctly. If in doubt, contact a 
qualified technician or your local retailer.

•      Keep the packaging materials (plastic bags, 

etc.) out of children's reach, as they are 
potentially dangerous.

2. Water and electrical connections

All water and electrical connections must be 
carried out by a qualified technician in 
compliance with the manufacturer’s instructions 
(refer to the enclosed assembly instructions) 
and current local safety regulations.

The appliance must only be used in the 
household for the prescribed uses.

1. Packaging 

The packing box may be fully recycled as 
confirmed by the recycling symbol 

.

2. Energy and water saving tips

Do not rinse crockery under running water.

Always fully load the dishwasher before 
switching on or set the wash programme to 
half load (if available) if one rack only has 
been filled.

If ecological energy sources are available, 
such as solar panel heating, heat pumps or 
centralised heating systems, the appliance 
may be connected to the hot water mains up 
to a maximum temperature of 60° C. Make 
sure the water inlet hose is of the correct 
type. Refer to the “Connections” chapter in 
these user instructions.

3. Disposal of the packaging material and 

old machine.
The appliance is built from reusable 
materials. If you decide to scrap the 
dishwasher, it must be disposed of in 
compliance with local waste disposal laws.

In any case, before scrapping, cut off 
the power cable so that the appliance 
cannot be connected to the mains.

1. Child safety:

Children must not be allowed to play with the 
dishwasher.

Store the detergent, rinse aid and salt in a 
dry place out of the reach of children.

2. General recommendations:

The open dishwasher door can only support 
the weight of the loaded rack when pulled out. 
Do not rest objects on the open door or sit or 
stand on it: the appliance may topple over!

Do not use solvents inside the dishwasher: 
risk of explosion!

Only use detergents, rinse aids and 
regeneration salts specially recommended 
for use in domestic dishwashers.

Before cleaning or carrying out any 

maintenance, switch off the appliance, 
disconnect the mains plug and turn off the 
water tap.

If a fault occurs, switch off the appliance and 
turn off the water tap.

If necessary, the power cable may be 
replaced with an identical one. 
The power cable must only be replaced by a 
qualified technician.

On completion of the programme, switch off 
the dishwasher and turn off the water tap.

3. For appliances with water stop system: 

The water inlet hose and plastic casing 
contain electrical components. Do not 
therefore cut the hose or immerse the plastic 
casing in water. If the hose is damaged, 
switch off the appliance immediately.

EC Declaration of conformity

This appliance has been designed, constructed 
and distributed in compliance with the safety 
requirements of EC Directives:

73/23/EC

89/336/EC

93/68/EC

IEC 436/DIN 44990

EN 50242

Load capacity: 12 place settings

.

BEFORE USING THE DISHWASHER

PROTECTING THE ENVIRONMENT

PRECAUTIONS AND GENERAL RECOMMENDATIONS

Summary of Contents for ADP 253 WH









Reviews: