E020401CW
26/11/04
the rate of the residual humidity.
Finished the heating cycle, the machine starts a
phase of cooling, during this phase in the display
appears the writing “COOLING”. This phase has
two programmable parameters: time and
temperature. The machine stops the program
when time finishes or when temperature has
reached.
If in the program you have included also the
phase of anti-wrinkle, in the display will appear the
writing “ANTIWRINKLE
When the writing “END” and an acoustic sound
appear, it means that the machine finishes. Open
the door and discharge the machine.
“SELECT A PROGRAM” appears and it is
possible to select another program.
6. OPERATING INTRUCTIONS ICD
In the previous paragraph, we have to add the
following information, in case the machine has the
system of survey of residual humidity.
The linen loading has to be equal to the 50% of
the nominal load.
Before introducing linen into the machine,
control eventual zip is completely opened,
and eventual metallic buttons are totally
removed or isolated.
7. TILTING OPERATIONS INSTRUCTIONS
In case the machine has the pneumatic tilting to
reverse the drum, add the following information.
ATENTION: when the machine is in tilting
or during the pneumatic opening door, the
user must keep himself out of the
machine, using the telecontrol.
Before using tilting, wait for the conclusion of a
program. Telecontrol use can be on or off using
the key switch low in the right side. When the
telecontrol is on, the microprocessor of the
machine is off. When the green light up in the left
side, is on means the push-button panel is on.
OPERATIONS OF LOADING (for the machines
which foreseen)
Operate the key switch to activate the push-button
panel. Open the door pressing at the same time
the facilitation button (low in the left side) and the
button “DOOR OPEN”. While the door opening is
concluded, invert the machine pressing at the
same time the facilitation button and “LOAD UP”.
When the charging operation is completed the
machine has to be put in horizontal position
pressing in the same time the facilitation button
and “LOAD DOWN”. Close the door pressing the
facilitation button and “CLOSE DOOR”.
CHARGE OPERATIONS
Operate the key switch to activate the push-button
panel. Open the door pressing at the same time
the facilitation button (low in the left side) and the
button “DOOR OPEN”. When the door opening is
concluded, reverse the machine pressing in the
same time the facilitation button (low in the left
side) and the button “UNLOAD DOWN”. When the
machine is in the charging position you can take
out the linen reversing the drum slowly (right
and/or left) pressing at the same time pressing the
facilitation button and the “UNLOAD ROTATION”
(RIGHT and/or LEFT). When the discharge is
ended the machine has to be positioned
horizontally pressing at the same time the
facilitation button and the “UNLOAD UP”. Close
the door pressing the facilitation button and the
“CLOSE DOOR”.
8. PAUSE AND STOP
During the functioning of the machine it is not
possible to change the characteristics of the
program. Opening the door the machine stops
and appears the writing “DOOR OPEN”
11
