background image

GB -4-

Daily check

3

Daily use

Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations

Open the cover A 

(press the dedicated button).

Only fill the 
detergent 
dispenser prior to 
starting a wash 
program.

Shut the cover 

by pressing dedicated ribs.

Insert detergent: Tablet / powder / liquid 

into the big chamber.

Use only one tablet per one cycle, 
only placed in detergent 
dispenser.

All types of tablets can be used, 
but for 2 in 1 type adding of salt is 
mandatory.

If required, 
open the 
cover B 
(press the 
dedicated 
button).

Add rinse 
aid
 to the 
max. line 
~150 ml

The rinse aid dosage can be 
adjusted to the detergent 
used. The lower the setting, 
the less rinse aid is dispensed 
(factory setting: position 4).
Press the button to open the 
cover B. Using a coin or 
similar object, turn the arrow 
to the desired setting. After 
adjusting the rinse aid setting, 
shut the cover again.

Visual 
indicator

2

Check the rinse aid indicator to check the 
level into the dispenser.

(depending on the model)

Rinse aid indicator on the control panel

Rinse aid indicator on the dispenser

The indicator lamp lights up when 
RINSE AID NEEDS TO BE ADDED.

dark: OK.

clear: NEEDS TO BE ADDED

Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause 
a fault function of the appliance.

If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). 
Plastic dishes have more difficulty drying and a higher rinse aid setting will not improve the situation.

Detergents with rinse aid incorporated may be effective only with longer programs. In the case of shorter programs, detergent residue may be a problem (if necessary, use powder 
detergent). Detergents with rinse aid incorporated tend to form excess suds.

Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator

Summary of Contents for ADG 130













Reviews: