Whirlpool ADB1100AW, Installation Instructions Manual

Page: 21 / 48

21
Check that top of door does not contact screws, brackets or
countertop. If it does, adjust leveling legs.
Open door and check that space between dishwasher cabinet
opening and tub is equal on both sides. If spacing is not equal,
loosen bracket screws secured and shift tub. Tighten bracket
screws.
Remove towel from dishwasher. Reinstall the lower dish rack.
If needed, see website for animated representation of this step.
Visit www.whirlpool.com/anchoring under FAQ tab.
Complete Installation
Place the plastic access panel against the dishwasher leg.
Check that the lower edge of the access panel touches the floor.
Adjust if necessary.
Using a flat-blade screwdriver, turn the fasteners
¹⁄₄
turn clockwise
to lock into place. The fasteners slot will be straight up and down
when properly locked.