background image

3

Proper Disposal of  

Your Old Refrigerator

Danger: Risk of child entrapment. Before You Throw Away 

Your Old Refrigerator or Freezer:

 

Take off the doors.

 

Leave the shelves in place so that children may not easily 

climb inside.

IMPORTANT:

 Child entrapment and suffocation are not 

problems of the past. Junked or abandoned refrigerators are still 

dangerous, even if they will sit for “just a few days.” If you are 

getting rid of your old refrigerator, please follow these instructions 

to help prevent accidents.

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

Remove packing materials. Do not use sharp instruments, 

rubbing alcohol, flammable fluids, or abrasive cleaners to remove 

tape or glue. These products can damage the surface of your 

refrigerator. For more information, see “Refrigerator Safety.”

WARNING

Suffocation Hazard

Remove doors from your old refrigerator. 
Failure to do so can result in death or brain damage.

Important information to know about disposal of 

refrigerants:

Dispose of refrigerator in accordance with Federal and Local 

regulations. Refrigerants must be evacuated by a licensed, 

EPA certified refrigerant technician in accordance with 

established procedures.

WARNING

Excessive Weight Hazard

Use two or more people to move and install 

refrigerator.
Failure to do so can result in back or other injury.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for 
cleaning or service, be sure to cover the floor with 
cardboard or hardboard to avoid floor damage. Always pull 
the refrigerator straight out when moving it. Do not wiggle or 
“walk” the refrigerator when trying to move it, as floor 
damage could occur.

Important information to know about glass shelves 
and covers:

Do not clean glass shelves or covers with warm water when 
they are cold. Shelves and covers may break if exposed to 
sudden temperature changes or impact, such as bumping. 
Tempered glass is designed to shatter into many small, 
pebble-size pieces. This is normal. Glass shelves and covers 
are heavy. Use both hands when removing them to avoid 
dropping.

Summary of Contents for 8WRS21SNHW





















Reviews: