Policies, standard documentation and additional product information can be found by:
•
Visiting our website
docs . whirlpool . eu
•
Using QR Code
•
Alternatively,
contact our After-sales Service
(See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identification
plate.
XXXXXXXXXXXXXX
Model: xxxXXXXxx
RECIPE
FUNCTION
WATER (ML)
PREHEAT
TEMPERATURE (°C)
DURATION (MIN)
LEVEL AND
ACCESSORIES
Fish fillets / cutlets
0.5 - 2 cm
250
-
190 - 210
15 - 25
3
Whole fish
300 - 600 g
250
-
190 - 210
15 - 30
3
Whole fish
600 g - 1.2 kg
250
-
180 - 200
25 - 45
3
Roast Beef rare
1 kg
250
-
190 - 210
40 - 55
3
Lamb shank
500 g - 1.5 kg
250
-
170 - 190
60 - 75
2
Chicken / guinea fowl / duck
Whole 1 - 1.5 kg
250
-
200 - 220
55 - 75
2
Chicken / guinea fowl / duck
Pieces 500 g - 1.5 kg
250
-
200 - 220
40 - 60
3
Chicken / turkey / duck
Whole 3 kg
250
-
160 - 180
100 - 140
2
Lamb / Beef / Pork
1 kg
250
-
170 - 190
60 - 100
3
Small bread
80 - 100 g
200
-
200 - 220
30 - 45
3
Sandwich loaf in tin
300 - 500 g
250
-
170 - 190
45 - 60
3
Bread loaf
500 g - 2 kg
250
-
160 - 170
50 - 100
2
Baguettes
200 - 300 g
250
-
200 - 220
30 - 45
3
The time indicated includes the preheating phase: we recommend
placing the food in the oven and setting the cooking time when
starting the function.
To remove the remaining limescale from the bottom of the
cavity after the
cooking, just pour 250 ml of white
vinegar onto the embossing of the cavity (alternatively, use a
specific descaling product. For availability please contact the
After Sales Service). Leave it to work at room temperature for
30 minutes, then clean the cavity with warm drinking water
and a soft cloth. Cleaning is recommended at least for every 5
to 10
cooking cycles.
CATALYTIC PANELS
This oven could be equipped with special catalytic liners that
facilitate cleaning of the cooking compartment thanks to
their special selfcleaning coating, which
is highly porous and able to absorb
grease and grime.
These panels are fitted to the shelf
guides: When repositioning and then
refitting the shelf guides, make sure that
the hooks at the top are slotted into the
appropriate holes in the panels.
To make best use of the catalytic panels’ self-cleaning
properties, we recommend heating the oven to 200 °C for
around one hour. The oven must be empty during this time.
Then leave the oven to cool down before removing any
remaining food residues using a non-abrasive sponge.
Please note: Using corrosive or abrasive cleaning agents, stiff
brushes, pan scourers or oven sprays could damage the catalytic
surface and compromise its self-cleaning properties. Please contact
our After-sales Service if you require replacement panels.
TROUBLESHOOTING
Problem
Possible cause
Solution
The oven is not working.
Power cut.
Disconnection from the mains.
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
The display shows the letter “F”
followed by a number or letter.
Oven failure.
Contact you nearest Client After-sales Service Centre and
state the number following the letter “F”.
The display is showing the
message “Hot” and the selected
function will not start.
Temperature too high.
Allow the oven to cool down before activating the function.
Select a different function.
The display shows unclear text
and appears to be broken.
Another language set.
Contact you nearest Client After-sales Service Centre.
