background image

Gas conversions

Gas conversions (from Natural gas to L.P. gas; or
from L.P. gas to Natural gas) must be done by a
qualified installer.

L.P. gas conversion

1.

Complete installation sections A-C (Pages

4-5) before converting cooktop to L.P. gas. 

Check

that main gas supply line has been shut off and
the power supply cord is disconnected.

2.

Remove burner grates, caps and screws

holding burner bases to cooktop. Lift burners off
cooktop.

DO NOT REMOVE THE PRESSURE REGULATOR.

3.

Open broiler drawer to locate pressure

regulator.

Pressure regulator: 

Remove plastic cover. Turn

cap marked “N” on front of pressure regulator
counterclockwise with a wrench to remove. 

Do

Not disturb or remove the spring beneath the
cap.

Turn the cap over and reinstall cap on

regulator so that the letters “L.P.” are visible.
Replace plastic cover over cap.

21.

Check that the broil burner is

operating.

You have just finished installing 

your new range. To get the most

efficient use from your range, read your

Use & Care Guide. 

Keep Installation Instructions and Guide

close to range for easy reference. 

The instructions will make installing the

range in another home as easy as the

first installation.

Check operation

(cont.)

E

22.

Close the broiler drawer. Press the

“OFF/CANCEL” pad.

Page 7

cap

burner base

electrode

screws

L.P.

plastic
cover

pressure
regulator

pressure
regulator

Natural

1. Press the “CUSTOM BROIL” pad.

• “HI” will appear in the display.
• The “BROIL” indicator will light.

2. Press the “START/ENTER” pad.

• “HEAT”and “ON” indicators will light.

The oven burner should light in 50-60

seconds; this delay is normal. 

The oven

valve requires a certain time before it will
open and allow gas to flow.

TEMP

OFF

CANCEL

START

ENTER

5 SEC

88:88

HEAT BAKE

TIMER

F

ON

BROIL

CANCEL

HR

BAKE

CUSTOM

BROIL

LIGHT

CLOCK

TEMP

MIN

TIMER

SET

TIMER

OFF

888

°

C

If your oven has this type of electronic
control pads:

Fire Hazard

Shut off gas supply line valve.
Make all conversions before turning gas
supply valve back on.
Failure to follow these instructions could
result in explosion, fire or other injury.

WARNING

L.P. gas

plastic
cover

cap

washer

Summary of Contents for 8053365










Reviews: