IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-594-4755 for assistance.
Model # 7LIECH-SSF-WL: Page 6
UNPACKING AND ASSEMBLY
Remove the dispenser from packaging:
1. Lay the box containing the unit on its side.
2. Open bottom flaps of the cardboard box.
3. Stand cooler upright, with box flaps unfolded.
4. Pull box straight up.
5. Unpack the drip tray and insert it into the dispenser.
6. Keep original packing for the duration of warranty.
TO OPEN:
TOP
TOP
TOP
TOP
INSTALLATION
1. Gently lay water cooler onto it’s back.
2. Install the feet with self locking nuts into the holes
marked 2,3,4 and 5.
3. Install the foot without a nut into the hole marked as 1.
4. Carefully stand the cooler up.
5. To level the cooler, first adjust feet 1,4 and 5,then 2
and 3.
6. For proper stability, all feet must be in contact with the
floor.
1
2
3
4
5
Foot with nut
Foot without nut
Excessive Weight Hazard
Use two or more people to move and install bottles.
Failure to do so can result in back or other injury.
WARNING
Tip Over Hazard
Do not use water cooler until leveling feet are attached
to bottom of water cooler and unit is level.
Failure to do so can result in death or serious injury.
WARNING
Tip Over Hazard
Do not use water cooler until leveling feet are attached
to bottom of water cooler and unit is level.
Failure to do so can result in death or serious injury.
WARNING
