GB38
SETTINGS
Turn the “Functions” knob indicator to the symbol
to access a submenu containing four display settings
which can be changed.
Clock
Turn the “Functions” knob to the symbol
: the word CLOCK appears on the display. To change the time of
day, see the previous paragraph (SETTING THE TIME).
Eco
With the ECO mode selected (ON), the display switches off when the oven is on standby or 5 minutes after the
end of cooking. To view information on the display, simply press a button or turn a knob.
1.
Turn the “Browse” knob to display “ECO”.
2.
Press
to access the setting (ON/OFF).
3.
Turn the “Browse” knob to select the desired setting and confirm by pressing button
.
Acoustic signal
To activate or deactivate the acoustic signal, proceed as follows:
1.
Turn the “Browse” knob to display “SOUND”.
2.
Press
to access the setting (ON/OFF).
3.
Turn the “Browse” knob to select the desired setting and confirm by pressing button
.
Brightness
To change the display brightness, proceed as follows:
1.
Turn the “Browse” knob to display “BRIGHTNESS”.
2.
Press button
: number 1 appears on the display.
3.
Turn the “Browse” knob to increase or decrease brightness and confirm by pressing
.
AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at page 40.
To activate the oven’s automatic cleaning cycle (pyro-cleaning), proceed as follows:
1.
Turn the “Functions” knob to symbol
: the word PYRO appears on the display.
2.
Press button
to confirm your choice and start the pyro-cleaning cycle.
To select ECO pyro-cleaning, turn the “Browse” knob: the word ECO appears bottom right on the display. Press
button
to start the shorter programme.
During pyro-cleaning, the oven door is automatically locked and the symbol
appears on the display. The
door remains locked at the end of the cleaning cycle: “COOL” appears on the display, indicating the oven is still
cooling down. When the oven cools to a safe temperature, the symbol
switches off and the display shows
“END”.
N.B:
if the automatic door lock control procedure fails to execute properly, the symbol
appears on the
display. If, on the other hand, the door remains closed due to a fault in the locking system,
and “DOOR
LATCHED” appear on the display. In this case, contact the After-sales Service.
