Whirlpool 3MAS4132FW0 Use And Care Manual Download Page 3

3

W

ASHER

S

AFETY

IMPORTANT SAFETY INSTRUCTIONS

WARNING –

To reduce the risk of fire, electric shock, or injury to persons when using the

washer, follow basic precautions, including the following:

Read all instructions before using the
washer.

Do not wash articles that have been 
previously cleaned in, washed in, soaked
in, or spotted with gasoline, dry-cleaning
solvents, other flammable, or explosive
substances as they give off vapours that
could ignite or explode.

Do not add gasoline, dry-cleaning 
solvents, or other flammable, or explosive
substances to the wash water. These
substances give off vapours that could
ignite or explode.

Under certain conditions, hydrogen gas
may be produced in a hot water system
that has not been used for 2 weeks or
more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been
used for such a period, before using the
washing machine, turn on all hot water
taps and let the water flow from each for
several 

– SAVE THESE INSTRUCTIONS –

minutes. This will release any accumulat-
ed hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during
this time. 

Do not allow children to play on or in the
washer. Close supervision of children is
necessary when the washer is used near
children.

Before the washer is removed from 
service or discarded, remove the lid.

Do not reach into the washer if the tub or
agitator is moving.

Do not install or store the washer where it
will be exposed to the weather.

Do not tamper with controls.

Do not repair or replace any part of the
washer or attempt any servicing unless
specifically recommended in this Use and
Care Guide or in published user-repair
instructions that you understand and have
the skills to carry out.

See Installation Instructions for 
grounding requirements.

You will be killed or seriously injured if you don’t 
follow instructions.

You can be killed or seriously injured if you don’t 
follow instructions.

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and
obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to hazards that can kill or hurt you and others.

All safety messages will be preceded by the safety alert symbol and the word “DANGER” or
“WARNING.” These words mean:

w

DANGER

w

WARNING

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what 
can happen if the instructions are not followed.

Summary of Contents for 3MAS4132FW0

















Reviews: